DataSheet.es    

Datasheet RFM73 Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes Category
1RFM73Low Power High Performance 2.4 GHz GFSK Transceiver

RFM73 Low Power High Performance 2.4 GHz GFSK Transceiver Features            2400-2483.5 MHz ISM band operation Support 250Kbps, 1Mbps and 2 Mbps air data rate Programmable output power Low power consumption Tolerate +/- 60ppm 16 MHz crystal Variable payload length
HOPERF
HOPERF
transceiver
2RFM73P-S2Low Power High Performance 2.4 GHz GFSK Transceiver Module

RFM73P-S2 V2.0 RFM73P-S2 Features • 2400-2483.5 MHz ISM band operation • Support 1 and 2 Mbps air data rate • Programmable output power (-5dBm to +20dBm) • Low power consumption • Variable payload length from 1 to 32bytes • Automatic packet processing • 6 data pipes for 1:6 star netwo
HOPERF
HOPERF
transceiver


RFM Datasheet ( Hoja de datos ) - resultados coincidentes

N.º Número de pieza Descripción Fabricantes PDF
1RFM-07088One Chip FM Receiver

MODEL: RFM-07088 One Chip FM Receiver The RFM-07088 is integrated circuits for use in mono portable and pocket radios. The module contains phase lock loop system. Onbroad build in auto scan and reset key. The model use minimum component and small size which easy for your applic
RF
RF
datasheet RFM-07088 pdf
2RFM01ISM Band FSK Receiver Module

RFM01 Datasheet REV1.2 ISM BAND FSK RECEIVER MODULE RFM01 (the purpose of this spec covers mainly for the physical characteristic of the module, for register configure and its related command info please refer to RF01 data sheets) RFM01 General Introduction RFM01 is a low
Hope RF
Hope RF
datasheet RFM01 pdf
3RFM01Universal ISM Band FSK Receiver

RFM01 Universal ISM Band FSK Receiver DESCRIPTION Hoperf’ RFM01 is a single module, low power, multi-channel FSK receiver designed for use in applications requiring FCC or ETSI conformance for unlicensed use in the 315, 433, 868, and 915 MHz bands. Used in conjunction with RFM02, Hoperf’ FSK tra
HOPERF
HOPERF
datasheet RFM01 pdf
4RFM02Universal ISM Band FSK Transmitter

RFM02 RFM02 Universal ISM Band FSK Transmitter RFM02 DESCRIPTION Hope’s RFM02 is a single chip, low power, multi-channel FSK transmitter designed for use in applications requiring FCC or ETSI conformance for unlicensed use in the 433, 868, and 915 MHz bands. Used in conjunction with RF01, Hope’
HOPERF
HOPERF
datasheet RFM02 pdf
5RFM10N12(RFM10N12/15 / RFM10P12/15) N-CHANNEL ENHANCEMENT-MODE POWER FIELD-EFFECT TRANSISTORS

GE Solid State
GE Solid State
datasheet RFM10N12 pdf
6RFM10N1210A 450V AND 500V 0.600 OHM N-CHANNEL POWER MOSFETS

New Jersey Semiconductor
New Jersey Semiconductor
datasheet RFM10N12 pdf
7RFM10N15(RFM10N12/15 / RFM10P12/15) N-CHANNEL ENHANCEMENT-MODE POWER FIELD-EFFECT TRANSISTORS

GE Solid State
GE Solid State
datasheet RFM10N15 pdf



Esta página es del resultado de búsqueda del RFM73. Si pulsa el resultado de búsqueda de RFM73 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap