DataSheet.es    



Datasheet PE4140 Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes PDF
1 PE4140   Ultra-High Linearity Broadband Quad MOSFET Array

PRODUCT SPECIFICATION PE4140 Product Description The PE4140 is an ultra-high linearity, passive broadband Quad MOSFET array with high dynamic range performance capable of operation beyond 6.0 GHz. This quad array operates with differential signals at all ports (RF, LO, IF), all
Peregrine Semiconductor
Peregrine Semiconductor
datasheet PE4140 pdf

PE4 Datasheet ( Hoja de datos ) - resultados coincidentes

Número de pieza Descripción Fabricantes PDF
PE4302

RF Digital Attenuator

Product Specification PE4302 Product Description The PE4302 is a high linearity, 6-bit RF Digital Step Attenuator “DSA” covering a 31.5 dB attenuation range in 0.5 dB steps. This 50-ohm RF DSA provides both parallel and serial CMOS control interface oper
Peregrine Semiconductor
Peregrine Semiconductor
datasheet pdf - Peregrine Semiconductor
PE42750

SPDT RF Switch

Product Description The PE42750 is an SPDT UltraCMOS® Switch designed for Broadband applications such as CATV, DTV, MultiTuner Digital Video Recorder (DVR ), Set-top Box, PCTV and Video Game Consoles. The PE42750 meets FCC 15.115 specification of 80 dB isolation at 216 MHz in bo
Peregrine Semiconductor
Peregrine Semiconductor
datasheet pdf - Peregrine Semiconductor
PE4259

SPDT High Power UltraCMOS

Product Specification PE4259 Product Description The PE4259 UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC through 3000 MHz. This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compati
Peregrine Semiconductor
Peregrine Semiconductor
datasheet pdf - Peregrine Semiconductor


Esta página es del resultado de búsqueda del PE4140. Si pulsa el resultado de búsqueda de PE4140 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


Enlace url :
[1] 

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap