Datasheet OP4177 Equivalent ( PDF )

N.º	Número de pieza	Descripción	Fabricantes	Category
1	OP4177	Precision Low Noise / Low Input Bias Current Operational Amplifiers FEATURES Low offset voltage: 60 μV maximum Very low offset voltage drift: 0.7 μV/°C maximum Low input bias current: 2 nA maximum Low noise: 8 nV/√Hz typical CMRR, PSRR, and AVO > 120 dB minimum Low supply current: 400 μA per amplifier Dual supply operation: ±2.5 V to ±15 V Unity-gain stable	Analog Devices	amplifier

OP4 Datasheet ( Hoja de datos ) - resultados coincidentes

N.º	Número de pieza	Descripción	Fabricantes	Catagory
1	OP400	Quad Low-Offset / Low-Power Operational Amplifier a FEATURES Low Input Offset Voltage 150 ␮V Max Low Offset Voltage Drift, Over –55؇ C to +125؇C 1.2 pV/؇C Max Low Supply Current (Per Amplifier) 725 ␮A Max High Open-Loop Gain 5000 V/mV Min Input Bias Current 3 nA Max Low Noise Voltage Density 11 nV/ ÷Hz at 1 kHz Stable With Large Capacitiv	Analog Devices	amplifier
2	OP400A	Low-Power Operational Amplifier OP400A Quad Low-Offset, Low-Power Operational Amplifier v+ BIAS +IN VOLTAGE LIMITING NETWORK -IN OUT FEATURES: • RAD-PAK® technology-hardened against natural space • radiation • Total dose hardness: - > 100 krad (Si), depending upon space mission • Package: - 16 pin Rad-Pak® flat pack	Maxwell	amplifier
3	OP4010B	Optical Timing Clock Preliminary OP4010B • • • • Quartz SAW Stabilized and Filtered “Diff Sine” Technology Fundamental-Mode Oscillation at 663.552 MHz Voltage Tunable for Phase Lock Loop Operations Optical Timing Reference for Forward Error Correction Applications The output of this device is generated and	RF Monolithics	data
4	OP4011B	Optical Timing Clock Preliminary OP4011B • • • • Quartz SAW Stabilized and Filtered “Diff Sine” Technology Fundamental-Mode Oscillation at 719.734 MHz Voltage Tunable for Phase Lock Loop Operations Optical Timing Reference for Forward Error Correction Applications The output of this device is generated and	RF Monolithics	data
5	OP4012B	Optical Timing Clock Preliminary ® OP4012B 644.53125 MHz • • • • Quartz SAW Stabilized Differential Output Technology Very Low Jitter Fundamental-Mode Operation at 644.53125 MHz Voltage Tunable for Phase Locked Loop Applications Timing Reference for 10G Optical Ethernet Communications Systems The OP4012B is	RF Monolithics	data
6	OP4013B	Optical Timing Clock Preliminary OP4013B • • • • Quartz SAW Stabilized and Filtered “Diff Sine” Technology Fundamental-Mode Oscillation at 693.48342 MHz Voltage Tunable for Phase Lock Loop Operations Optical Timing Reference for 10G Eithernet Applications 693.48342 MHz The output of this device is generate	RF Monolithics	data
7	OP4014B	Optical Timing Clock Preliminary OP4014B • • • • Quartz SAW Stabilized and Filtered “Diff Sine” Technology Fundamental-Mode Oscillation at 627.329 MHz Voltage Tunable for Phase Lock Loop Operations Optical Timing Reference for G.709 Timing Applications The output of this device is generated and filtered by	RF Monolithics	data

Esta página es del resultado de búsqueda del OP4177. Si pulsa el resultado de búsqueda de OP4177 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.

nuevas actualizaciones

Número de pieza	Descripción	Fabricantes	PDF
SPS122	Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.	Sanken	PDF

DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap