|
|
Datasheet MAX1478 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | |
6 | MAX1478 | 1% Accurate / Digitally Trimmed /Rail-to-Rail Sensor Signal Conditioner 19-1538; Rev 0; 9/99
KIT ATION EVALU E L B A IL AVA
1% Accurate, Digitally Trimmed, Rail-to-Rail Sensor Signal Conditioner
General Description Features
o Medium Accuracy (±1%), Single-Chip Sensor Signal Conditioning o Rail-to-Rail® Output o Sensor Errors Trimmed Using Correction Coefficients Sto |
Maxim Integrated |
|
5 | MAX14780E | RS-485/RS-422 Transceiver MAX14780E
+5.0V, ±30kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceiver
General Description
The MAX14780E is a +5V, ±30kV HBM ESD half duplex RS-485/422 transceiver.
The MAX14780E features reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly termin |
Maxim Integrated Products |
|
4 | MAX14781E | Half-Duplex RS-485 Transceiver MAX14781E
Half-Duplex RS-485 Transceiver with Polarity Correction
General Description
The MAX14781E +5V, half-duplex ±25kV ESD-protected RS-485 transceiver features integrated automatic polarity correction to ensure that miswired A and B lines are autonomously corrected, simplifying equipment and |
Maxim Integrated |
|
3 | MAX14782E | 500Kbps 3.3V to 5V RS-485/RS-422 Transceiver MAX14782E
EVALUATION KIT AVAILABLE
500Kbps 3.3V to 5V RS-485/RS-422 Transceiver with ±35kV HBM ESD Protection
General Description
The MAX14782E is a 3.3V to 5V ESD-protected transceiver intended for half-duplex RS-485/RS-422 communication up to 500kbps. The device is optimized for extended cable |
Maxim Integrated |
Esta página es del resultado de búsqueda del MAX1478. Si pulsa el resultado de búsqueda de MAX1478 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |