DataSheet.es    



Datasheet EL5210CS Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes PDF
4 EL5210CS   30MHz Rail-to-Rail Input-Output Op Amps

EL5210C/EL5410C EL5210C/EL5410C 30MHz Rail-to-Rail Input-Output Op Amps Features • 30MHz -3dB bandwidth • Supply voltage = 4.5V to 16.5V • Low supply current (per amplifier) = 2.5mA • High slew rate = 33V/µs • Unity-gain stable • Beyond the rails input capability • Rail-to-rail outp
Elantec Semiconductor
Elantec Semiconductor
datasheet EL5210CS pdf
3 EL5210CS   30MHz Rail-to-Rail Input-Output Op Amps

® EL5210, EL5410 Data Sheet December 22, 2004 FN7185.1 30MHz Rail-to-Rail Input-Output Op Amps The EL5210 and EL5410 are low power, high voltage rail-torail input-output amplifiers. The EL5210 contains two amplifiers in one package and the EL5410 contains four amplifiers. Operating on supplies ra
Intersil Corporation
Intersil Corporation
datasheet EL5210CS pdf
2 EL5210CS-T13   30MHz Rail-to-Rail Input-Output Op Amps

EL5210C/EL5410C EL5210C/EL5410C 30MHz Rail-to-Rail Input-Output Op Amps Features • 30MHz -3dB bandwidth • Supply voltage = 4.5V to 16.5V • Low supply current (per amplifier) = 2.5mA • High slew rate = 33V/µs • Unity-gain stable • Beyond the rails input capability • Rail-to-rail outp
Elantec Semiconductor
Elantec Semiconductor
datasheet EL5210CS-T13 pdf
1 EL5210CS-T13   30MHz Rail-to-Rail Input-Output Op Amps

® EL5210, EL5410 Data Sheet December 22, 2004 FN7185.1 30MHz Rail-to-Rail Input-Output Op Amps The EL5210 and EL5410 are low power, high voltage rail-torail input-output amplifiers. The EL5210 contains two amplifiers in one package and the EL5410 contains four amplifiers. Operating on supplies ra
Intersil Corporation
Intersil Corporation
datasheet EL5210CS-T13 pdf


Esta página es del resultado de búsqueda del EL5210CS. Si pulsa el resultado de búsqueda de EL5210CS se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


Enlace url :
[1] 

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap