DataSheet.es    



Datasheet EL5210 Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes PDF
12 EL5210   30MHz Rail-to-Rail Input-Output Op Amps

® EL5210, EL5410 Data Sheet December 22, 2004 FN7185.1 30MHz Rail-to-Rail Input-Output Op Amps The EL5210 and EL5410 are low power, high voltage rail-torail input-output amplifiers. The EL5210 contains two amplifiers in one package and the EL5410 contains four amplifiers. Operating on supplies ra
Intersil Corporation
Intersil Corporation
datasheet EL5210 pdf
11 EL5210C   30MHz Rail-to-Rail Input-Output Op Amps

EL5210C/EL5410C EL5210C/EL5410C 30MHz Rail-to-Rail Input-Output Op Amps Features • 30MHz -3dB bandwidth • Supply voltage = 4.5V to 16.5V • Low supply current (per amplifier) = 2.5mA • High slew rate = 33V/µs • Unity-gain stable • Beyond the rails input capability • Rail-to-rail outp
Elantec Semiconductor
Elantec Semiconductor
datasheet EL5210C pdf
10 EL5210CS   30MHz Rail-to-Rail Input-Output Op Amps

EL5210C/EL5410C EL5210C/EL5410C 30MHz Rail-to-Rail Input-Output Op Amps Features • 30MHz -3dB bandwidth • Supply voltage = 4.5V to 16.5V • Low supply current (per amplifier) = 2.5mA • High slew rate = 33V/µs • Unity-gain stable • Beyond the rails input capability • Rail-to-rail outp
Elantec Semiconductor
Elantec Semiconductor
datasheet EL5210CS pdf
9 EL5210CS   30MHz Rail-to-Rail Input-Output Op Amps

® EL5210, EL5410 Data Sheet December 22, 2004 FN7185.1 30MHz Rail-to-Rail Input-Output Op Amps The EL5210 and EL5410 are low power, high voltage rail-torail input-output amplifiers. The EL5210 contains two amplifiers in one package and the EL5410 contains four amplifiers. Operating on supplies ra
Intersil Corporation
Intersil Corporation
datasheet EL5210CS pdf


Esta página es del resultado de búsqueda del EL5210. Si pulsa el resultado de búsqueda de EL5210 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


Enlace url :
[1] [2] [3] 

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap