|
|
PDF ER1D Data sheet ( Hoja de datos )
| Número de pieza | ER1D | |
| Descripción | SURFACE MOUNT SUPER FAST RECTIFIER | |
| Fabricantes | MDD | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ER1D (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
ER1A THRU ER1J
SURFACE MOUNT SUPER FAST RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 1.0 Ampere
DO-214AC/SMA
0.067 (1.70)
0.051 (1.30)
0.177(4.50)
0.157(3.99)
0.110(2.80)
0.100(2.54)
0.012(0.305)
0.006(0.152)
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
For surface mounted applications
Low reverse leakage
Built-in strain relief,ideal for automated placement
High forward surge current capability
High temperature soldering guaranteed:
250 C/10 seconds at terminals
Glass passivated chip junction
0.096(2.42)
0.078(1.98)
0.060(1.52)
0.030(0.76)
0.008(0.203)MAX.
0.208(5.28)
0.188(4.80)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic body over passivated chip
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.002 ounce, 0.07 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
SYMBOLS ER1A ER1B ER1C ER1D ER1E ER1G ER1J
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TL=55 C
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
VRRM
VRMS
VDC
I(AV)
50 100 150 200 300 400 600
35 70 105 140 210 280 420
50 100 150 200 300 400 600
1.0
IFSM
VF
IR
trr
CJ
RθJA
TJ,TSTG
30.0
0.95
5.0
50.0
35
15.0
60.0
-65 to +150
1.25
1.7
Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas
UNITS
VOLTS
VOLTS
VOLTS
Amp
Amps
Volts
µA
ns
pF
C/W
C
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet ER1D.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ER100 | SUPERFAST RECOVERY RECTIFIERS(VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere) |  Pan Jit International Inc. |
| ER100 | SUPERFAST RECOVERY RECTIFIERS |  TRSYS |
| ER100 | (ER100 - ER106) Plastic Ultra-Fast Recover Rectifier |  SIYU |
| ER1000 | SUPERFAST RECOVERY RECTIFIERS(VOLTAGE: 50 to 400 Volts CURRENT: 10.0 Amperes) | Pan Jit International Inc. |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |