|
|
Número de pieza | PE42430 | |
Descripción | RF Switch | |
Fabricantes | Peregrine Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PE42430 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! Product Description
The PE42430 is a HaRP™-enhanced reflective SP3T RF
switch developed on the UltraCMOS® process
technology. This tiny general purpose switch is ideal for
WLAN and bluetooth applications in the 2.4 - 2.5 GHz
bands as well as general broadband switching
applications. It is comprised of three RF ports and has
low insertion loss and high isolation. An on-chip CMOS
decode logic facilitates a three-pin CMOS control
interface. Unlike competitive solutions, there is no need
for blocking capacitors when using the PE42430.
Peregrine’s HaRP™ technology enhancements deliver
high linearity and exceptional harmonics performance.
It is an innovative feature of the UltraCMOS® process,
providing performance superior to GaAs with the
economy and integration of conventional CMOS.
Product Specification
PE42430
UltraCMOS® SP3T Reflective
RF Switch 100 – 3000 MHz
Features
HaRP™-enhanced UltraCMOS® device
Low insertion loss
Typical 0.45 dB @ 1 GHz
Typical 0.55 dB @ 2.5 GHz
IIP3: Typical +66 dBm
P0.1dB Compression: Typical +30 dBm
Excellent ESD tolerance of 4500V HBM
and 250V MM on all ports
No external VDD required. VDD is derived
from switch control inputs
Package type: 8-lead 1.5 x 1.5 mm DFN
Figure 1. Functional Diagram
RFC
RF1
ESD
RF2
ESD
RF3
ESD
CMOS
Control/Driver
and ESD
V1 V2 V3
71-0086-01
Figure 2. Package Type
8-lead 1.5 x 1.5 mm DFN
Document No. 70-0326-04 │ www.psemi.com
©2010-2012 Peregrine Semiconductor Corp. All rights reserved.
Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com
Page 1 of 11
1 page PE42430
Product Specification
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS® device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the specified rating.
Moisture Sensitivity Level
The Moisture Sensitivity Level rating for the
PE42430 in the 8-lead 1.5 x 1.5 mm DFN package
is MSL1.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS®
devices are immune to latch-up.
Table 6. Truth Table
Path
V1 V2 V3
RFC - RF1
1
0
0
RFC - RF2
0
1
0
RFC - RF3
0
0
1
Note: Any state other than shown in Table 6 are undefined states
Switching Frequency
The PE42430 has a maximum 25 kHz switching
rate.
Document No. 70-0326-04 │ www.psemi.com
©2010-2012 Peregrine Semiconductor Corp. All rights reserved.
Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com
Page 5 of 11
5 Page PE42430
Product Specification
Figure 19. Tape and Reel Drawing
Drawing not drawn to scale
Pocket hole diameter 0.6 ± 0.05 mm
Bumped die are oriented active side down
Maximum cavity angle 5o
Table 7. Ordering Information
Order Code
PE42430MLAB-Z
EK42430-01
Description
PE42430 SP3T RF Switch
PE42430 Evaluation board
Package
Green 8LD 1.5x1.5 DFN
Evaluation Kit
Shipping Method
3000 units T/R
1/Box
Sales Contact and Information
For sales and contact information please visit www.psemi.com.
Advance Information: The product is in a formative or design stage. The datasheet contains design target
specifications for product development. Specifications and features may change in any manner without notice.
Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later
date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best
possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to
change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer
Notification Form).
The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use
of this information. Use shall be entirely at the user’s own risk.
No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant,
or in other applications intended to support or sustain life, or in any application in which the failure of the
Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no
liability for damages, including consequential or incidental damages, arising out of the use of its products in
such applications.
The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE
are trademarks of Peregrine Semiconductor Corp.
Document No. 70-0326-04 │ www.psemi.com
©2010-2012 Peregrine Semiconductor Corp. All rights reserved.
Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com
Page 11 of 11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet PE42430.PDF ] |
Número de pieza | Descripción | Fabricantes |
PE4243 | SPDT UltraCMOS RF Switch | Peregrine Semiconductor |
PE42430 | RF Switch | Peregrine Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |