|
|
PDF XP1044-QL Data sheet ( Hoja de datos )
| Número de pieza | XP1044-QL | |
| Descripción | Power Amplifier | |
| Fabricantes | MA-COM | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XP1044-QL (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
XP1044-QL
3W Power Amplifier Module
4.0-5.9 GHz
Rev. V2
Features
34 dBm P1dB
Pout 26 dBm @ EVM = 2.5% (PAR=9.17 dB)
46 dBm OIP3
18.5 dB Gain
8V Voltage Supply
Input Internally Matched
7x7mm Surface Mount Package
Ideal for WiMAX Applications @ 5.8 GHz and
Applications between 4 GHz and 5 GHz
RoHS* Compliant and 260°C Reflow Compatible
Functional Block Diagram
Pin 1 Indicator
Pin-out Details:
Description
The XP1044 is a highly linear 2-stage power
amplifier capable of 18.5 dB of gain, 34 dBm of
power at 1 dB compression and is housed in an
RoHS compliant 7x7mm package. The XP1044
provides less than 2.5% EVM at 26 dBm output
power with 802.16 OFDM signal and peak to
average ratio 9.17 dB. The input and output of the
device are internally pre-matched facilitating a
simplified input and output match. This product
operates off an 8V voltage supply and requires
negative voltage which is used for current control.
The XP1044-QL is specifically designed for WiMAX
applications between 4.9 GHz and 5.9 GHz, and the
performance can be shifted by adding external
matching components to cover applications between
4.0 GHz and 5.0 GHz.
Ordering Information
Part Number
Package
XP1044-QL-0N00
bulk quantity
XP1044-QL-EV1
XP1044-QL-EV2
evaluation module
for 4.9 GHz ~ 5.9 GHz
evaluation module
for 4.0 GHz ~ 5.0 GHz
Pin Configuration
Pin No. Function
3,4,5
RF IN
8 VG!
9 VG2
17,18,19
RF OUT
Pin No.
23
22
1,2,6,7,10,
11,12,13,
14,15,16,
20,21,24,
25,26,27,
28
Function
VD1
VD2
GND
Absolute Maximum Ratings
Parameter
Absolute Max.
Drain Supply Voltage (Vd)
+9.0 V
Gate Supply Voltage (Vg)
0 V ~ -5 V
RF Input Power (RFin)
+23 dBm
Stage 1 Current (Idd1)
375 mA
Stage 2 Current (Idd2)
750 mA
Power Dissipation (PDC)
Storage Temperature
Junctions Temperature
Operating Temperature (Ta)
ESD (HBM)
Moisture Sensitivity level
Thermal Resistance (Rth)1
9,0 W
-55 °C to +150 °C
175 °C
-40 °C to See Note 2
Class 1A
MSL3
15.6 °C
(1) *Thermal resistance of stage 2 only
(2) Calculate maximum operating backside temperature using: Tmax =
167 °C – [Vd*Idd2*Rth]. Thermal resistance of the 1st stage is 2x Rth
of the output stage, and therefore Idd1 must not exceed ½ Idd2 for a
specific maximum temperature
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
1 page  
XP1044-QL
3W Power Amplifier Module
4.0-5.9 GHz
Typical Performance Curves (EV1, Idq1 = 300 mA, Idq2 = 600 mA, Over Temp)
Rev. V2
22
21
20
19
18
17
+25ºC
16 -40ºC
15 +85ºC
14
4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6
36
34
32
30
28 +25ºC
-40ºC
26 +85ºC
24
4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6
52
50
48
46
44 +25ºC
-40ºC
42 +85ºC
40
4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6
0
-10
-20
+25ºC
-30 -40ºC
+85ºC
-40
-50
-60
4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet XP1044-QL.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XP1044-QL | Power Amplifier | MA-COM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |