|
|
PDF DCR890F65 Data sheet ( Hoja de datos )
| Número de pieza | DCR890F65 | |
| Descripción | Phase Control Thyristor | |
| Fabricantes | DYNEX | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DCR890F65 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
DCR890F65
Phase Control Thyristor
DS5924-3 August 2014 (LN31844)
FEATURES
Double Side Cooling
High Surge Capability
KEY PARAMETERS
VDRM
IT(AV)
ITSM
dV/dt*
dI/dt
6500V
894A
12000A
1500V/µs
200A/µs
APPLICATIONS
Medium Voltage Soft Starts
High Voltage Power Supplies
Static Switches
* Higher dV/dt selections available
VOLTAGE RATINGS
Part and
Ordering
Number
Repetitive Peak
Voltages
VDRM and VRRM
V
Conditions
DCR890F65*
DCR890F60
DCR890F55
DCR890F50
6500
6000
5500
5000
Tvj = -40°C to 125°C,
IDRM = IRRM = 200mA,
VDRM, VRRM tp = 10ms,
VDSM & VRSM =
VDRM & VRRM + 100V
respectively
Lower voltage grades available.
*6200V @ -400 C, 6500V @ 00 C
Outline type code: F
(See Package Details for further information)
Fig. 1 Package outline
ORDERING INFORMATION
When ordering, select the required part number
shown in the Voltage Ratings selection table.
For example:
DCR890F65
Note: Please use the complete part number when ordering
and quote this number in any future correspondence
relating to your order.
www.dynexsemi.com
1/11
1 page  
SEMICONDUCTOR
DCR890F65
16
14
12
10
8
6
4 180
120
90
2 60
30
0
0 500 1000 1500 2000 2500 3000
Mean on-state current, IT(AV) - (A)
Fig.3 On-state power dissipation – sine wave
125
180
120
90
100 60
30
75
50
25
0
0
500
1000
1500
Mean on-state current, IT(AV) - (A)
Fig.4 Maximum permissible case temperature,
double side cooled – sine wave
125
180
120
90
100 60
30
75
50
25
0
0
500
1000
1500
Mean on-state current, IT(AV) - (A)
16
14
12
10
8
6
4
2
0
0
d.c.
180
120
90
60
30
1000
2000
3000
Mean on-state current, IT(AV) - (A)
4000
Fig.5 Maximum permissible heatsink temperature,
double side cooled – sine wave
Fig.6 On-state power dissipation – rectangular wave
www.dynexsemi.com
5/11
5 Page 
SEMICONDUCTOR
IMPORTANT INFORMATION:
This publication is provided for information only and not for resale.
The products and information in this publication are intended for use by appropriately trained technical personnel.
DCR890F65
Due to the diversity of product applications, the information contained herein is provided as a general guide only and does not constitute
any guarantee of suitability for use in a specific application.The user must evaluate the suitability of the product and the completeness of
the product data for the application. The user is responsible for product selection and ensuring all safety and any warning requirements
are met. Should additional product information be needed please contact Customer Service.
Although we have endeavoured to carefully compile the information in this publication it may contain inaccuracies or typographical
errors. The information is provided without any warranty or guarantee of any kind.
This publication is an uncontrolled document and is subject to change without notice. When referring to it please ensure that it is the
most up to date version and has not been superseded.
The products are not intended for use in applications where a failure or malfunction may cause loss of life, injury or damage to property.
The user must ensure that appropriate safety precautions are taken to prevent or mitigate the consequences of a product failure or
malfunction.
The products must not be touched when operating because there is a danger of electrocution or severe burning. Always use
protective safety equipment such as appropriate shields for the product and wear safety glasses. Even when disconnected any
electric charge remaining in the product must be discharged and allowed to cool before safe handling using protective gloves.
Extended exposure to conditions outside the product ratings may affect reliability leading to premature product failure. Use outside the
product ratings is likely to cause permanent damage to the product. In extreme conditions, as with all semiconductors, this may include
potentially hazardous rupture, a large current to flow or high voltage arcing, resulting in fire or explosion. Appropriate application design
and safety precautions should always be followed to protect persons and property.
Product Status & Product Ordering:
We annotate datasheets in the top right hand corner of the front page, to indicate product status if it is not yet fully approved for
production. The annotations are as follows:-
Target Information:
Preliminary Information:
No Annotation:
This is the most tentative form of information and represents a very preliminary specification.
No actual design work on the product has been started.
The product design is complete and final characterisation for volume production is in
progress.The datasheet represents the product as it is now understood but details may change.
The product has been approved for production and unless otherwise notified by Dynex any
product ordered will be supplied to the current version of the data sheet prevailing at the
time of our order acknowledgement.
All products and materials are sold and services provided subject to Dynex’s conditions of sale, which are available on request.
Any brand names and product names used in this publication are trademarks, registered trademarks or trade names of their
respective owners.
HEADQUARTERS OPERATIONS
DYNEX SEMICONDUCTOR LIMITED
Doddington Road, Lincoln, Lincolnshire, LN6 3LF
United Kingdom.
Phone: +44 (0) 1522 500500
Fax: +44 (0) 1522 500550
Web: http://www.dynexsemi.com
CUSTOMER SERVICE
Phone: +44 (0) 1522 502753 / 502901
Fax: +44 (0) 1522 500020
e-mail: [email protected]
Dynex Semiconductor Ltd.
Technical Documentation – Not for resale.
www.dynexsemi.com
11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet DCR890F65.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DCR890F65 | Phase Control Thyristor | DYNEX |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |