DataSheet.es    


PDF VLA315H-24100A Data sheet ( Hoja de datos )

Número de pieza VLA315H-24100A
Descripción ISOLATED TYPE DC-DC CONVERTER
Fabricantes Isahaya Electronics 
Logotipo Isahaya Electronics Logotipo



Hay una vista previa y un enlace de descarga de VLA315H-24100A (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! VLA315H-24100A Hoja de datos, Descripción, Manual

DESCRIPTION
The VLA315H-24100A is an isolated DC-DC converter designed
to control the industrial equipment. It can input DC1000Vmax
directly and convert to low voltage.
Total output power is 100W.
FEATURES
Wide input voltage----- 400V to 1000V DC
Output
----------- +24V, 4.2A (100.8W)
•Electrical isolation (between input and output)
------------- 2500Vrms 1 minute
Over current protection (auto resumption)
APPLICATIONS
On-board pre-regulator for industrial control equipment
BLOCK DIAGRAM
HYBRID IC
VLA315H-24100A
ISOLATED TYPE DC-DC CONVERTER

1 page




VLA315H-24100A pdf
HYBRID IC
VLA315H-24100A
ISOLATED TYPE DC-DC CONVERTER
FOR SAFETY USING
Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production,
and in it’s reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage.
When handling Hics, please note the following cautions.
CAUTIONS
Packing
Carrying
Storage
Extended storage
Maximum ratings
Polarity
The materials used in packing Hics can only withstand normal external conditions.
When exposed to outside shocks, rain and certain environmental contaminators, the packing
materials will deteriorates. Please take care in handling.
1) Don’t stack boxes too high. Avoid placing heavy materials on boxes.
2) Boxes must be positioned correctly during transportation to avoid breakage.
3) Don't throw or drop boxes.
4) Keep boxes dry. Avoid rain or snow.
5) Minimal vibration and shock during transportation is desirable.
When storing Hics, please observe the following notices or possible deterioration of their electrical
characteristics, risk of solderability, and external damage may occur.
1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must
not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius
with humidity at 40 to 60%.
2) Avoid locations where corrosive gasses are generated or where much dust accumulates.
3) Storage cases must be static proof.
4) Avoid putting weight on boxes.
When extended storage is necessary, Hics must be kept non-processed. When using Hics which
have been stored for more than one year or under severe conditions, be sure to check that the
exterior is free from flaw and other damages.
To prevent any electrical damages, use Hics within the maximum ratings. The temperature,
current, voltage, etc. must not exceed these conditions.
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in
inserting leads into the board holes, conforming to the external view for the terminal arrangement.
5

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet VLA315H-24100A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
VLA315H-24100AISOLATED TYPE DC-DC CONVERTERIsahaya Electronics
Isahaya Electronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar