|
|
PDF VSMY3940X01 Data sheet ( Hoja de datos )
| Número de pieza | VSMY3940X01 | |
| Descripción | High Speed Infrared Emitting Diode | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VSMY3940X01 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
www.vishay.com
VSMY3940X01
Vishay Semiconductors
High Speed Infrared Emitting Diode, 940 nm,
Surface Emitter Technology
948553
DESCRIPTION
As part of the SurfLightTM portfolio, the VSMY3940X01 is an
infrared, 940 nm emitting diode based on surface emitter
technology with high radiant intensity, high optical power
and high speed, molded in a PLCC-2 package for surface
mounting (SMD).
FEATURES
• Package type: surface mount
• Package form: PLCC-2
• Dimensions (L x W x H in mm): 3.5 x 2.8 x 1.75
• AEC-Q101 qualified
• Peak wavelength: λp = 940 nm
• High reliability
• High radiant power
• High radiant intensity
• Angle of half intensity: ϕ = ± 60°
• Suitable for high pulse current operation
• Floor life: 168 h, MSL 3, acc. J-STD-020
• Lead (Pb)-free reflow soldering
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
RELEASED FOR APPLICATIONS
Infrared radiation source for operation with CMOS cameras
(illumination)
• High speed IR data transmission
• IR touch panels
• 3D TV
• Light curtain
PRODUCT SUMMARY
COMPONENT
VSMY3940X01
Ie (mW/sr)
15
Note
• Test conditions see table “Basic Characteristics”
ϕ (deg)
± 60
λP (nm)
940
tr (ns)
10
ORDERING INFORMATION
ORDERING CODE
VSMY3940X01-GS08
VSMY3940X01-GS18
Note
• MOQ: minimum order quantity
PACKAGING
Tape and reel
Tape and reel
REMARKS
MOQ: 7500 pcs, 1500 pcs/reel
MOQ: 8000 pcs, 8000 pcs/reel
PACKAGE FORM
PLCC-2
PLCC-2
Rev. 1.2, 25-Jun-14
1 Document Number: 84220
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
VSMY3940X01
Vishay Semiconductors
SOLDER PROFILE
300
250
255 °C
240 °C
217 °C
200
150
max. 120 s
100
max. 260 °C
245 °C
max. 30 s
max. 100 s
50 max. ramp up 3 °C/s max. ramp down 6 °C/s
0
0
19841
50 100 150 200 250 300
Time (s)
Fig. 10 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020
DRYPACK
Devices are packed in moisture barrier bags (MBB) to
prevent the products from moisture absorption during
transportation and storage. Each bag contains a desiccant.
FLOOR LIFE
Floor life (time between soldering and removing from MBB)
must not exceed the time indicated on MBB label:
Floor life: 168 h
Conditions: Tamb < 30 °C, RH < 60 %
Moisture sensitivity level 3, acc. to J-STD-020.
DRYING
In case of moisture absorption devices should be baked
before soldering. Conditions see J-STD-020 or label.
Devices taped on reel dry using recommended conditions
192 h at 40 °C (+ 5 °C), RH < 5 %.
TAPE AND REEL
PLCC-2 components are packed in antistatic blister tape
(DIN IEC (CO) 564) for automatic component insertion.
Cavities of blister tape are covered with adhesive tape.
3.5 2.2
3.1 2.0
5.75
5.25
3.6 8.3
3.4 7.7
4.0
3.6
1.85
1.65
1.6 4.1
1.4 3.9
4.1
3.9
0.25
2.05
1.95
94 8668
Fig. 12 - Tape Dimensions in mm for PLCC-2
MISSING DEVICES
A maximum of 0.5 % of the total number of components per
reel may be missing, exclusively missing components at the
beginning and at the end of the reel. A maximum of three
consecutive components may be missing, provided this gap
is followed by six consecutive components.
De-reeling direction
94 8158
> 160 mm
Tape leader
40 empty
compartments
Carrier leader
min. 75 empty
compartments
Carrier trailer
Fig. 13 - Beginning and End of Reel
The tape leader is at least 160 mm and is followed by a
carrier tape leader with at least 40 empty compartments.
The tape leader may include the carrier tape as long as the
cover tape is not connected to the carrier tape. The least
component is followed by a carrier tape trailer with a least
75 empty compartments and sealed with cover tape.
Adhesive tape
Blister tape
Component cavity
Fig. 11 - Blister Tape
94 8670
Identification
Label:
Vishay
type
group
tape code
production
code
quantity
120°
4.5
3.5
2.5
1.5
10.0
9.0
13.00
12.75
63.5
60.5
180 14.4 max.
178
94 8665
Fig. 14 - Dimensions of Reel-GS08
Rev. 1.2, 25-Jun-14
5 Document Number: 84220
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet VSMY3940X01.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VSMY3940X01 | High Speed Infrared Emitting Diode | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |