|
|
PDF DDTA144ELP Data sheet ( Hoja de datos )
| Número de pieza | DDTA144ELP | |
| Descripción | PNP PRE-BIASED (R1=R2) SMALL SIGNAL TRANSISTOR | |
| Fabricantes | Diodes | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DDTA144ELP (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
DDTA144ELP
PNP PRE-BIASED (R1=R2) SMALL SIGNAL TRANSISTOR IN DFN1006
Product Summary
Part Number
DDTA144ELP
R1 (NOM)
47kΩ
R2 (NOM)
47kΩ
Marking
P2
Features
Epitaxial Planar Die Construction
Ultra-Small Leadless Surface Mount Package
Ideally Suited for Automated Assembly Processes
Totally Lead Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free "Green" Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
Case: X1-DFN1006-3
Case Material: Molded Plastic, "Green" Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish — NiPdAu.
Solderable per MIL-STD-202, Method 208 e4
Weight: 0.0009 grams (Approximate)
X1-DFN1006-3
Bottom View
B
C
E
Top View
Pin-Out
IN
1 R1
R2
OUT
B C 3 (or -supply)
E
2 + Supply
or GND
Device Symbol
IN B 1 3
E
C OUT
(or -supply)
GND (or +supply)
Equivalent Inverter
Circuit
Ordering Information (Note 4)
Product
DDTA144ELP-7
DDTA144ELP-7B
Marking
P2
P2
Reel size (inches)
7
7
Tape width (mm)
8
8
Quantity per reel
3,000
10,000
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
DDTA144ELP-7
P2
From date code 1527 (YYWW),
this changes to:
P2
Top View
Dot Denotes Collector Side
Top View
Bar Denotes Base and Emitter Side
DDTA144ELP-7B
P2
Top View
Bar Denotes Base and Emitter Side
P2 = Product Type Marking Code
DDTA144ELP
Document number: DS30844 Rev. 7 - 2
1 of 5
www.diodes.com
May 2015
© Diodes Incorporated
1 page  
DDTA144ELP
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
DDTA144ELP
Document number: DS30844 Rev. 7 - 2
5 of 5
www.diodes.com
May 2015
© Diodes Incorporated
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet DDTA144ELP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DDTA144ELP | PNP PRE-BIASED (R1=R2) SMALL SIGNAL TRANSISTOR | Diodes |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |