DataSheet.es    


PDF SB10H150CT-1 Data sheet ( Hoja de datos )

Número de pieza SB10H150CT-1
Descripción Dual Common-Cathode High-Voltage Schottky Rectifier
Fabricantes Vishay 
Logotipo Vishay Logotipo



Hay una vista previa y un enlace de descarga de SB10H150CT-1 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! SB10H150CT-1 Hoja de datos, Descripción, Manual

MBR10H150CT, MBRF10H150CT, SB10H150CT-1
www.vishay.com
Vishay General Semiconductor
Dual Common-Cathode High-Voltage Schottky Rectifier
Low Leakage Current 5.0 μA
TO-220AB
ITO-220AB
123
MBR10H150CT
123
MBRF10H150CT
TO-262AA
FEATURES
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Solder dip 275 °C max.10 s, per JESD 22-B106
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency inverters, freewheeling, and
polarity protection application.
123
SB10H150CT-1
PIN 1
PIN 3
PIN 2
CASE
PRIMARY CHARACTERISTICS
IF(AV)
VRRM
IFSM
VF
TJ max.
2x5A
150 V
160 A
0.72 V
175 °C
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-262AA
Molding compound meets UL 94V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current (Fig.1)
total device
per diode
Peak forward surge current 8.3 ms single half sine-wave superimposed on
rated load per diode
Peak repetitive reverse current per diode at tp = 2 µs, 1 kHz
Peak non-repetitive reverse surge energy per diode (8/20 waveform)
Non-repetitve avalanche energy per diode at 25 °C, IAS = 1.5 A, L = 10 mH
Voltage rate of change (rated VR)
Operating junction and storage temperature range
Isolation voltage (ITO-220AB only) from terminals to heatsink t = 1 min
SYMBOL
VRRM
VRWM
VDC
IF(AV)
IFSM
IRRM
ERSM
EAS
dV/dt
TJ, TSTG
VAC
MBR10H150CT
150
150
150
10
5
160
1.0
10
11.25
10 000
- 65 to + 175
1500
UNIT
V
V
V
A
A
A
mJ
mJ
V/μs
°C
V
Revision: 21-Nov-12
1 Document Number: 88779
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 page




SB10H150CT-1 pdf
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet SB10H150CT-1.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SB10H150CT-1Dual Common-Cathode High-Voltage Schottky RectifierVishay
Vishay

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar