DataSheet.es    


PDF UPSR100 Data sheet ( Hoja de datos )

Número de pieza UPSR100
Descripción HIGH PRECISION CC/CV PRIMARY SIDE REGULATOR
Fabricantes Unisonic Technologies 
Logotipo Unisonic Technologies Logotipo



Hay una vista previa y un enlace de descarga de UPSR100 (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! UPSR100 Hoja de datos, Descripción, Manual

UNISONIC TECHNOLOGIES CO., LTD
UPSR100
Preliminary
HIGH PRECISION CC/CV
PRIMARY SIDE REGULATOR
CMOS IC
DESCRIPTION
The UTC UPSR100 is a primary control unit for switch mode
charger and adapter applications. The controlled variable is
transferred by an auxiliary winding from the secondary to the
primary side. The device uses Pulse Frequency Modulation (PFM)
method to build discontinuous conduction mode (DCM) flyback
power supplies.
The UTC UPSR100 operates in primary-side sensing and
regulation. Opto-coupler and TL431 could be eliminated. It also
eliminates the need of loop compensation circuitry while
maintaining stability.
The UTC UPSR100 achieves high precision CV/CC regulation
and high power efficiency. It offers comprehensive protection
coverage with auto-recovery features including Cycle-by-cycle
current limiting, output over voltage protection, feedback loop open
protection, short circuit protection, leading edge blanking, VCC
under voltage lockout, etc.
SOP-8
FEATURES
* ±5% constant voltage regulation at universal AC input
* High precision constant current regulation at universal AC input
* Primary side control without TL431 and opto-coupler
* Programmable CV and CC regulation
* Eliminates control loop compensation circuitry
* Flyback topology in DCM operation
* Random frequency modulation to reduce system EMI
ORDERING INFORMATION
* Driver BJT switch
* Built-in leading edge blanking
* Built-in primary winding inductance
compensation
* Open circuit protection
* Over voltage protection
* Short circuit protection
Ordering Number
UPSR100G-S08-R
Package
SOP-8
Packing
Tape Reel
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 7
QW-R502-946.d

1 page




UPSR100 pdf
UPSR100
Preliminary
CMOS IC
OPERATION DESCRIPTION
The UTC UPSR100 is a primary control unit for switch mode charger and adapter applications. It operates in
primary-side sensing and regulation. Opto-coupler and TL431 could be eliminated. Proprietary built-in CV and CC
control can achieve high precision CV/CC performance. It uses Pulse Frequency Modulation (PFM) method to build
discontinuous conduction mode (DCM) flyback power supplies.
Startup control
The voltage regulator provides the internal power supply VDD. For VCC and VDD external capacitors are required.
The current biasing of UTC UPSR100 is adjustable by an external resistor. Internal time constants, thresholds and
the output current depend from the value of this resistor. The startup circuit activates the IC after startup and
deactivates the IC in case of UVLO.
Operating Current
The Operating current of UTC UPSR100 is as low as 500µA. Good efficiency and very low standby power can be
achieved.
Constant Voltage Operation
The output voltage is defined by the transmission ratio between the secondary and auxiliary winding. The UTC
UPSR100 captures the auxiliary winding feedback voltage at FB pin and operates in constant-voltage (CV) mode to
regulate the output voltage. The auxiliary voltage reflects the output voltage is given by:
VAUX
=
NA
NS
×VO
+
V
(1)
Where V indicates the drop voltage of the output diode.
Figure 2. Auxiliary voltage waveform
Via a resistor divider connected between the auxiliary winding and FB, the VAUX is sampled at the Tsampling end
and it is hold until the next sampling. The sampled voltage is compared with 4V reference voltage and the error is
amplified. The error amplifier output reflects the load condition and controls the Toff time to regulate the output
voltage, thus constant output voltage can be achieved.
Constant Current Operation
When the sampled voltage is below 4V reference voltage and the error amplifier output reaches its maximum, thus
UTC UPSR100 operates in constant-current (CC) mode. The CC point and maximum output power can be externally
adjusted by external current sense resistor Rcs. The larger Rcs, the smaller CC point is, and the smaller output
power becomes.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 7
QW-R502-946.d

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet UPSR100.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
UPSR100HIGH PRECISION CC/CV PRIMARY SIDE REGULATORUnisonic Technologies
Unisonic Technologies
UPSR104HIGH PRECISION CC/CV PRIMARY-SIDE PWM CONTROLLERUnisonic Technologies
Unisonic Technologies

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar