DataSheet.es    


PDF S-57K1 Data sheet ( Hoja de datos )

Número de pieza S-57K1
Descripción HIGH-SPEED BIPOLAR HALL EFFECT LATCH
Fabricantes Seiko Instruments 
Logotipo Seiko Instruments Logotipo



Hay una vista previa y un enlace de descarga de S-57K1 (archivo pdf) en la parte inferior de esta página.


Total 15 Páginas

No Preview Available ! S-57K1 Hoja de datos, Descripción, Manual

S-57K1 A Series
FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE
www.sii-ic.com
HIGH-SPEED BIPOLAR HALL EFFECT LATCH
© SII Semiconductor Corporation, 2013-2015
Rev.1.5_01
The S-57K1 A Series, developed by CMOS technology, is a high-accuracy Hall IC that operates with high temperature and
high-withstand voltage.
The output voltage changes when the S-57K1 A Series detects the intensity level of magnetic flux density and a polarity
change. Using the S-57K1 A Series with a magnet makes it possible to detect the rotation status in various devices.
The S-57K1 A Series includes a reverse voltage protection circuit and an output current limit circuit.
High-density mounting is possible by using the small SOT-23-3 package.
Due to its high-accuracy magnetic characteristics, the S-57K1 A Series can make operation's dispersion in the system
combined with magnet smaller.
Caution This product can be used in vehicle equipment and in-vehicle equipment. Before using the product in the
purpose, contact to SII Semiconductor Corporation is indispensable.
Features
Pole detection:
Detection logic for magnetism*1:
Output form*1:
Magnetic sensitivity*1:
Operating cycle:
Power supply voltage range:
Built-in regulator
Built-in reverse voltage protection circuit
Built-in output current limit circuit
Operation temperature range:
Lead-free (Sn 100%), halogen-free
AEC-Q100 in process*2
*1. The option can be selected.
*2. Contact our sales office for details.
Bipolar latch
VOUT = "L" at S pole detection
VOUT = "H" at S pole detection
Nch open-drain output, Nch driver + built-in pull-up resistor
BOP = 3.0 mT typ., BOP = 6.0 mT typ.
tCYCLE = 8.0 μs typ.
VDD = 3.5 V to 26.0 V
Ta = 40°C to +125°C
Applications
Automobile equipment
Home appliance
DC brushless motor
Housing equipment
Industrial equipment
Package
SOT-23-3
1

1 page




S-57K1 pdf
FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH
Rev.1.5_01
S-57K1 A Series
Electrical Characteristics
Table 5
(Ta = +25°C, VDD = 12.0 V, VSS = 0 V unless otherwise specified)
Item Symbol
Condition
Min.
Typ.
Max.
Unit
Test
Circuit
Power supply voltage
Current consumption
VDD
IDD
Current consumption
during reverse connection
IDDREV
Output voltage
Output drop voltage
Leakage current
Operating cycle
VOUT
VD
ILEAK
tCYCLE
Nch open-drain output product
Average value
Nch driver + built-in pull-up resistor product
Average value, VOUT = "H"
Nch open-drain output product
VDD = 26.0 V
Nch driver + built-in pull-up resistor product
VDD = 26.0 V
Nch open-drain output product
Output transistor Nch, VOUT = "L", IOUT = 10 mA
Nch driver + built-in pull-up resistor product
Output transistor Nch, VOUT = "L", IOUT = 10 mA
Nch driver + built-in pull-up resistor product
VOUT = "H", VD = VDD VOUT
Nch open-drain output product
Output transistor Nch, VOUT = "H" = 26.0 V
3.5 12.0 26.0 V
3.0 4.0 mA
3.0 4.0 mA
1
mA
5
mA
− − 0.4 V
− − 0.5 V
− − 20 mV
− − 10 μA
8.0 − μs
1
1
1
1
2
2
2
3
Operating frequency
fCYCLE
125 kHz
Output limit current
IOM VOUT = 12.0 V
22 70 mA 3
Start up time
tPON
20 − μs 4
Pull-up resistor
RL Nch driver + built-in pull-up resistor product
7 10 13 kΩ −
5

5 Page





S-57K1 arduino
FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH
Rev.1.5_01
S-57K1 A Series
Precautions
If the impedance of the power supply is high, the IC may malfunction due to a supply voltage drop caused by feed-
through current. Take care with the pattern wiring to ensure that the impedance of the power supply is low.
Note that the IC may malfunction if the power supply voltage rapidly changes. When the IC is used under the
environment where the power supply voltage rapidly changes, it is recommended to judge the output voltage of the IC
by reading it multiple times.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
Although this IC has a built-in output current limit circuit, it may suffer physical damage such as product deterioration
under the environment where the absolute maximum ratings are exceeded.
Although this IC has a built-in reverse voltage protection circuit, it may suffer physical damage such as product
deterioration under the environment where the absolute maximum ratings are exceeded.
The application conditions for the power supply voltage, the pull-up voltage, and the pull-up resistor should not exceed
the package power dissipation.
Large stress on this IC may affect on the magnetic characteristics. Avoid large stress which is caused by bend and
distortion during mounting the IC on a board or handle after mounting.
SII Semiconductor Corporation claims no responsibility for any disputes arising out of or in connection with any
infringement by products including this IC of patents owned by a third party.
11

11 Page







PáginasTotal 15 Páginas
PDF Descargar[ Datasheet S-57K1.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
S-57K1HIGH-SPEED BIPOLAR HALL EFFECT LATCHSeiko Instruments
Seiko Instruments

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar