|
|
PDF RBA8206 Data sheet ( Hoja de datos )
| Número de pieza | RBA8206 | |
| Descripción | REMOTE FAN CONTROL IC | |
| Fabricantes | Unisonic Technologies | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RBA8206 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
UNISONIC TECHNOLOGIES CO., LTD
RBA8206
Preliminary
LINEAR INTEGRATED CIRCUIT
REMOTE FAN CONTROL IC
DESCRIPTION
The UTC RBA8206 is an electronic fan controller LSI utilizing
CMOS technology. Both key control input and remote control
input are provided to build the highest performance with the least
external components. Besides speed mode control, swing control,
off-timer and light control, this device offers wind mode control
and buzzer output. All of these characteristics above make UTC
RBA8206 can be used to build a full function electronic fan with
remote control capability.
FEATURES
* Low power consumption
* Three speed modes: Strong, Middle and Low
* Three operation modes: Ordinary, Nature and Rhythm Sleep
* Work mode memory
* Middle wind start-up
* Buzzer indicator function operation
* 2-bits consumer code
* Uses 455kHz crystal oscillator
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
RBA8206L-xx-D20-T
RBA8206G-xx-D20-T
Package
DIP-20
DIP-20
Packing
Tube
RBA8206L-xx-D20-T
(1)Packing Type
(2)Package Type
(3)Time Output
(4)Halogen Free
(1) T: Tube
(2) D20: DIP-20
(3) refer to TIME OUTPUT AND MODE
(4) L: Lead Free, G: Halogen Free
TIME OUTPUT AND MODE
PART NUMBER
A4
ACCUMULATED
◎
NON-ACCUMULATED
-
INDEPENDENT
ON/OFF
-
Note: A4 indicated have four time output (0.5, 1, 2, 4 hour) accumulated timer mode.
LIGHT CONTROL
◎
www.unisonic.com.tw
Copyright © 2013 Unisonic Technologies Co., Ltd
1 of 7
QW-R109-032.a
1 page  
RBA8206
Preliminary
LINEAR INTEGRATED CIRCUIT
FUNCTION DERCRIPTION
The UTC RBA8206 is an electronic fan control IC, it use electronic touch switch and timer replace the traditional
switch and timer. UTC RBA8206 improved nature wind and sleep wind mode expect hold the traditional fan
functions, and improved a swing control and light control function. UTC RBA8206 cooperate with the UTC
RBA5104 encode IC, implement the remote control of the fan.
“OFF” key:
It used to shut down the power of motor, fan stop operating, and the control circuit resume static state, and stored
he operate mode of power on. When started next time, it is activated into the operation mode stored in the operation
memory. (Timer and sleep wind mode will not be stored)
“ON/SPEED” key:
It start fan if pressed when fan is off. It turn on the fan with middle wind for increase start moment. After three
second, it resume low wind mode, or the operation mode stored in the operating memory.
This key set the operate mode when fan is on, if successive pressing of ON/SPEED key, it will operate as low
wind, middle wind, strong wind, low wind, middle wind ……go along with cycle.
“MODE” key:
It used to select the operating mode. If pressed successively when fan is on, it will operate as follows: normally
wind, nature wind, sleep wind, normally, nature wind …go along with cycle.
A) Ordinary wind: the he wind speed is set by SPEED key and does not change as time passes.
B) Nature wind: it is set in program, and operate with “SPEED” key, can produce strong nature wind, middle nature
wind, low nature wind, simulate the really nature wind.
C) Sleep wind: In sleep wind mode, the wind speed steps down automatically one level every interval, until it
reaches low wind level.
Where is the rule of down:
1) If fan set in strong wind mode at first, it operate in strong nature wind for half an hour, then switch into middle
nature wind, after half an hour switch into low nature wind, until the preset time end or turn off fan.
2) If fan set in middle wind mode at first, it operates in middle nature wind for half an hour, then switch into low
nature wind, until the preset time end or turn off fan.
3) If fan set in low nature wind at first, it operates in low nature wind, until the preset time end or turn off.
“TIMER” key:
This key used to set the preset off time.
Type mark with “A4” mean have four section time output (0.5, 1, 2, 4hour) accumulated.
When fan is in the time mode, LED will indicate the remain time, means the fan will stop after the display time.
“SWING” key:
If pressed when fan is in the operate mode, it can control the fan swing, it is invalid when fan stooped.
“LIGHT” key:
It is used to control light, is independent of the operate mode.
Buzzer output:
1) Turn on send out “Bi-Bi”
2) Turn off send out “Bi-”
3) Other available operate (include key press and remote controller receive) send out “Bi”
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 7
QW-R109-032.a
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet RBA8206.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RBA8206 | REMOTE FAN CONTROL IC | Unisonic Technologies |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |