|
|
PDF V400DK1-KS1 Data sheet ( Hoja de datos )
| Número de pieza | V400DK1-KS1 | |
| Descripción | TFT LCD Module | |
| Fabricantes | INNOLUX | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de V400DK1-KS1 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
PRODUCT SPECIFICATION
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
MODEL NO.: V400DK1
SUFFIX: KS1
Revision : C8
Customer :
APPROVED BY
SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your signature and comments.
Approved By
Checked By
Chao-Chun Chung Vita Wu
Prepared By
Delia Lin
Version 1.0
1
The copyright belongs to InnoLux. Any unauthorized use is prohibited
Date : Nov. 29, 2013
1 page  
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V400DK1-KS1 is a 40” TFT Liquid Crystal Display module with LED Backlight unit and 8Lanes V-by-One
HS interface. This module supports 3840 x 2160 Quad Full HDTV format and can display true 1.07G colors
(8-bit+FRC). The driving board module for backlight is built-in.
1.2 FEATURES
－ High brightness : 350 nits
－ High contrast ratio : 5000:1
－ Fast response time : Gray to Gray typical : 8.5 ms
－ High color saturation : NTSC 72%
－ Quad Full HDTV (3840 x 2160 pixels) resolution, true HDTV format
－ V-by-One HS interface
－ Optimized response time for 50Hz/60Hz frame rate
－ Viewing Angle : 176(H)/176(V) (CR>20) VA Technology
－ Ultra wide viewing angle: Super MVA technology
－ RoHs compliance
－ T-con input frame rate *: FHD 50/60Hz, FHD 100/120Hz, QFHD 24/30Hz or QFHD 50/60Hz,
Output frame rate: QFHD 50/60Hz, QFHD 100/120Hz
*: The detail setting such as I2C command or timing requirement in FHD/QFHD is specified in INX application note.
It’s important and necessary to follow the specification either in product SPEC or application note, otherwise it may
lead to abnormal or no display. INX application note would be provided by INX in the design-in stage.
1.3 GENERAL SPECIFICATIONS
Item
Specification
Unit Note
Active Area
Bezel Opening Area
878.112(H) x 485.352(V) (39.5” diagonal)
881.112(H) x 488.352(V)
mm
(1)
mm
Driver Element
a-si TFT active matrix
--
Pixel Number
3840 x R.G.B. x 2160
pixel
-
Pixel Pitch(Sub Pixel)
0.076225 (H) x 0.2247 (V)
mm -
Pixel Arrangement
RGB vertical stripe
--
Display Colors
1.07G colors (8-bit+FRC)
color
-
Display Operation Mode
Transmissive mode / Normally black
--
Surface Treatment
Anti-Glare coating (Haze 1%)，Hardness 3H
-
(2)
Rotation Function
Unachievable
(3)
Display Orientation
Signal input with “INX”
(3)
Note (1) Please refer to the attached drawings in chapter 11 for more information about the front and back outlines.
Note (2) The spec of the surface treatment is temporarily for this phase. INX reserves the rights to change this feature.
Version 1.0
5
The copyright belongs to InnoLux. Any unauthorized use is prohibited
Date : Nov. 29, 2013
5 Page 
PRODUCT SPECIFICATION
3.2 BACKLIGHT UNIT
3.2.1 CONVERTER CHARACTERISTICS
Parameter
Symbol
Power Consumption
Converter Input Voltage
PBL(2D)
PBL(3D)
VBL
Min.
－
－
22.8
Value
Typ.
37.6
38.1
24.0
Max.
43.2
43.2
25.2
Unit
W
W
VDC
Note
(1), (2)
(1), (2)
Converter Input Current
Input Inrush Current
IBL(2D)
IBL(3D)
IR(2D)
IR(3D)
－
－
－
－
1.57
1.8 A Non Dimming
1.59 1.8 A
－
3.9 Apeak
VBL=22.8V
(3), (6)
－
5.4 Apeak
VBL=22.8V
(3), (6)
Dimming Frequency
FB
170
180
190 Hz
(5)
Dimming Duty Ratio
DDR
0
-
100 %
(4), (5)
Life Time
- 30,000
-
- Hrs
(7)
Note (1) The power supply capacity should be higher than the total converter power consumption PBL. Since the pulse
width modulation (PWM) mode was applied for backlight dimming, the driving current changed as PWM duty
on and off. The transient response of power supply should be considered for the changing loading when
converter dimming.
Note (2) The measurement condition of Max. value is based on 40" backlight unit under input voltage 24V, at 2D/3D
Mode and lighting 1 hour later.
Note (3) For input inrush current measure, the VBL rising time from 10% to 90% is about 20ms.
Note (4) EPWM signal have to input available duty range. Between 97% and 100% duty (DDR) have to be avoided.
(97% < DDR < 100%) But 100% duty (DDR) is possible. 5% duty (DDR) is only valid for electrical operation.
Note (5) FB and DDR are available only at 2D Mode.
Note (6) Below diagram is only for power supply design reference.
Version 1.0
11
The copyright belongs to InnoLux. Any unauthorized use is prohibited
Date : Nov. 29, 2013
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet V400DK1-KS1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| V400DK1-KS1 | TFT LCD Module | INNOLUX |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |