DataSheet.es    


PDF FAN53525 Data sheet ( Hoja de datos )

Número de pieza FAN53525
Descripción Digitally Programmable TinyBuck Regulator
Fabricantes Fairchild Semiconductor 
Logotipo Fairchild Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de FAN53525 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! FAN53525 Hoja de datos, Descripción, Manual

July 2014
FAN53525
3.0A, 2.4MHz, Digitally Programmable TinyBuck® Regulator
Features
Fixed-Frequency Operation: 2.4 MHz
Best-in-Class Load Transient
Continuous Output Current Capability: 3.0 A
2.5 V to 5.5 V Input Voltage Range
Digitally Programmable Output Voltage:
- 0.600 V to 1.39375 V in 6.25 mV Steps
Programmable Slew Rate for Voltage Transitions
I2C-Compatible Interface Up to 3.4 Mbps
PFM Mode for High Efficiency in Light Load
Quiescent Current in PFM Mode: 50 µA (Typical)
Input Under-Voltage Lockout (UVLO)
Thermal Shutdown and Overload Protection
15-Bump Wafer-Level Chip Scale Package (WLCSP)
Applications
Application, Graphic, and DSP Processors
- ARM™, Tegra™, OMAP™, NovaThor™,
ARMADA™, Krait™, etc.
Hard Disk Drives, LPDDR3
Tablets, Netbooks, Ultra-Mobile PCs
Smart Phones
Gaming Devices
Description
The FAN53525 is a step-down switching voltage regulator
that delivers a digitally programmable output from an input
voltage supply of 2.5 V to 5.5 V. The output voltage is
programmed through an I2C interface capable of operating
up to 3.4 MHz.
Using a proprietary architecture with synchronous
rectification, the FAN53525 is capable of delivering 3.0 A
continuous at over 80% efficiency, maintaining that efficiency
at load currents as low as 10 mA. The regulator operates at
a nominal fixed frequency of 2.4 MHz, which reduces the
value of the external components to 330 nH for the output
inductor and as low as 20 µF for the output capacitor.
Additional output capacitance can be added to improve
regulation during load transients without affecting stability,
allowing inductance up to 1.2 µH to be used.
At moderate and light loads, Pulse Frequency Modulation
(PFM) is used to operate in Power-Save Mode with a typical
quiescent current of 50 µA at room temperature. Even with
such a low quiescent current, the part exhibits excellent
transient response during large load swings. At higher loads,
the system automatically switches to fixed-frequency control,
operating at 2.4 MHz. In Shutdown Mode, the supply current
drops below 1 µA, reducing power consumption. PFM Mode
can be disabled if fixed frequency is desired. The FAN53525
is available in a 15-bump, 1.310 mm x 2.015 mm, 0.4 mm
ball pitch WLCSP.
All trademarks are the property of their respective owners.
Figure 1. Typical Application
© 2012 Fairchild Semiconductor Corporation
FAN53525 • Rev. 1.0.1
www.fairchildsemi.com

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet FAN53525.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
FAN53525Digitally Programmable TinyBuck RegulatorFairchild Semiconductor
Fairchild Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar