DataSheet.es    


PDF SA150CA Data sheet ( Hoja de datos )

Número de pieza SA150CA
Descripción Zener Transient Voltage Suppressors
Fabricantes ON Semiconductor 
Logotipo ON Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de SA150CA (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! SA150CA Hoja de datos, Descripción, Manual

SA5.0CA Series
500 Watt Peak Power
MiniMOSORBZener
Transient Voltage
Suppressors
Bidirectional*
The SA5.0CA series is designed to protect voltage sensitive
components from high voltage, highenergy transients. They have
excellent clamping capability, high surge capability, low zener
impedance and fast response time. The SA5.0CA series is supplied in
ON Semiconductor’s exclusive, cost-effective, highly reliable
Surmetict axial leaded package and is ideally-suited for use in
communication systems, numerical controls, process controls,
medical equipment, business machines, power supplies and many
other industrial/consumer applications.
Specification Features:
Working Peak Reverse Voltage Range 5.0 to 170 V
Peak Power 500 Watts @ 1 ms
ESD Rating of Class 3 (>16 KV) per Human Body Model
Maximum Clamp Voltage @ Peak Pulse Current
Low Leakage < 1 mA above 8.5 V
UL 497B for Isolated Loop Circuit Protection
Maximum Temperature Coefficient Specified
Response Time is typically < 1 ns
Mechanical Characteristics:
CASE: Void-free, Transfer-molded, Thermosetting plastic
FINISH: All external surfaces are corrosion resistant and leads are
readily solderable
MAXIMUM LEAD TEMPERATURE FOR SOLDERING PURPOSES:
230°C, 1/16from the case for 10 seconds
POLARITY: Cathode band does not imply polarity
MOUNTING POSITION: Any
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Power Dissipation (Note 1)
@ TL 25°C
Steady State Power Dissipation @
TL 75°C, Lead Length = 3/8
Derated above TL = 75°C
Thermal Resistance,
JunctiontoLead
PPK
PD
RqJL
500 Watts
3.0 Watts
30 mW/°C
33.3 °C/W
Operating and Storage Temperature TJ, Tstg
Range
55 to +175
°C
1. Nonrepetitive current pulse per Figure 3 and derated above TA = 25°C
per Figure 2.
*Please see SA5.0A to SA170A for Unidirectional devices.
http://onsemi.com
AXIAL LEAD
CASE 59
PLASTIC
LSA
xYxYxWCAW
L = Assembly Location
SAxxxCA = ON Device Code
YY = Year
WW = Work Week
ORDERING INFORMATION
Device
Package
Shipping
SAxxxCA
Axial Lead 1000 Units/Box
SAxxxCARL* Axial Lead 5000/Tape & Reel
*SA6.5CA, SA48CA, SA64CA, and SA78CA Not
Available in 5000/Tape & Reel
Devices listed in bold, italic are ON Semiconductor
Preferred devices. Preferred devices are recommended
choices for future use and best overall value.
© Semiconductor Components Industries, LLC, 2006
August, 2006 Rev. 4
1
Publication Order Number:
SA5.0CA/D

1 page




SA150CA pdf
SA5.0CA Series
OUTLINE DIMENSIONS
Transient Voltage Suppressors Axial Leaded
500 Watt Peak Power MiniMOSORB
MINI MOSORB
CASE 5909
B ISSUE S
KD
A
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 59−04 OBSOLETE, NEW STANDARD 59−09.
4. 59−03 OBSOLETE, NEW STANDARD 59−10.
5. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY.
6. POLARITY DENOTED BY CATHODE BAND.
7. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
INCHES
DIM MIN MAX
A 0.228 0.299
B 0.102 0.142
D 0.028 0.034
K 1.000 −−−
MILLIMETERS
MIN MAX
5.80 7.60
2.60 3.60
0.71 0.86
25.44 −−−
MiniMOSORB and Surmetic are trademarks of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81357733850
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
SA5.0CA/D

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet SA150CA.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SA150C500W TRANSIENT VOLTAGE SUPPRESSORSWon-Top Electronics
Won-Top Electronics
SA150CGLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)Pan Jit International
Pan Jit International
SA150CA500W TRANSIENT VOLTAGE SUPPRESSORDiodes Incorporated
Diodes Incorporated
SA150CA500W TRANSIENT VOLTAGE SUPPRESSORSWon-Top Electronics
Won-Top Electronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar