DataSheet.es    


PDF CPH3455 Data sheet ( Hoja de datos )

Número de pieza CPH3455
Descripción Power MOSFET ( Transistor )
Fabricantes ON Semiconductor 
Logotipo ON Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de CPH3455 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! CPH3455 Hoja de datos, Descripción, Manual

CPH3455
Power MOSFET
35V, 104m, 3A, Single N-Channel
This Power MOSFET is produced using ON Semiconductor’s trench
technology, which is specifically designed to minimize gate charge and low
on resistance. This device is suitable for applications with low gate charge
driving or low on resistance requirements.
Features
Low On-Resistance
4V drive
Pb-Free, Halogen Free and RoHS compliance
Typical Applications
Load Switch
Motor Drive
SPECIFICATIONS
ABSOLUTE MAXIMUM RATING at Ta = 25°C (Note 1, 2)
Parameter
Symbol
Value
Unit
Drain to Source Voltage
VDSS
35 V
Gate to Source Voltage
VGSS
±20 V
Drain Current (DC)
ID 3 A
Drain Current (Pulse)
PW 10μs, duty cycle 1%
IDP
12 A
Power Dissipation
When mounted on ceramic substrate
(900mm2 × 0.8mm)
PD
1W
Junction Temperature
Tj 150 °C
Storage Temperature
Tstg
55 to +150
°C
Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage
the device. If any of these limits are exceeded, device functionality should not
be assumed, damage may occur and reliability may be affected.
2 : This product is designed to “ESD immunity<200V*”, so please take care when
handling.
*Machine Model
THERMAL RESISTANCE RATINGS
Parameter
Junction to Ambient
When mounted on ceramic substrate
(900mm2 × 0.8mm)
Symbol
RθJA
Value
Unit
125 °C/W
www.onsemi.com
VDSS
35V
RDS(on) Max
104m@ 10V
173m@ 4.5V
208m@ 4V
ID Max
3A
ELECTRICAL CONNECTION
N-Channel
PACKING TYPE : TL
MARKING
TL
ORDERING INFORMATION
See detailed ordering and shipping
information on page 5 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
June 2015 - Rev. 3
1
Publication Order Number :
CPH3455/D

1 page




CPH3455 pdf
PACKAGE DIMENSIONS
unit : mm
CPH3
CASE 318BA
ISSUE O
CPH3455
1 : Gate
2 : Source
3 : Drain
Recommended
Soldering Footprint
0.6
0.95 0.95
ORDERING INFORMATION
Device
CPH3455-TL-H
CPH3455-TL-W
Marking
LM
Package
CPH3
SC-59, SOT-23, TO-236
(Pb-Free / Halogen Free)
Shipping (Qty / Packing)
3,000 / Tape & Reel
† For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF
Note on usage : Since the CPH3455 is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
www.onsemi.com
5

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet CPH3455.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CPH3453N-Channel Silicon MOSFETSanyo Semicon Device
Sanyo Semicon Device
CPH3455N-Channel Silicon MOSFETSanyo Semicon Device
Sanyo Semicon Device
CPH3455Power MOSFET ( Transistor )ON Semiconductor
ON Semiconductor
CPH3456N-Channel Silicon MOSFETSanyo Semicon Device
Sanyo Semicon Device

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar