DataSheet.es    


PDF IL33290 Data sheet ( Hoja de datos )

Número de pieza IL33290
Descripción ISO K Line Serial Link Interface
Fabricantes IK Semiconductor 
Logotipo IK Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de IL33290 (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! IL33290 Hoja de datos, Descripción, Manual

TECHNICAL DATA
ISO K Line Serial Link Interface
IL33290
The IL33290 is a serial link bus interface device
designed to provide bidirectional half-duplex
communication interfacing in automotive diagnostic
applications. It is designed to interface between the
vehicle.s on-board microcontroller and systems off-
board the vehicle via the special ISO K line.
The IL33290 is designed to meet the Diagnostic
Systems ISO9141 specification. The devices K line
bus driver.s output is fully protected against bus
shorts and overtemperature conditions.
The IL33290 derives its robustness to temperature
and voltage extremes by being built on a process,
incorporating CMOS logic, bipolar/MOS analog
circuitry, and DMOS power FETs. Although the IL33290 was principally designed for
automotive applications, it is suited for other serial communication applications. It is
parametrically specified over an ambient temperature range of -40°C ≤ TA ≤ 125°C and
8.0 V ≤ VBB ≤ 18 V supply. The economical SO-8 surface-mount plastic package makes
the IL33290 very cost effective.
Features
Designed to Operate Over Wide Supply Voltage of 8.0 to 18 V
Ambient Operating Temperature of -40 to 125°C
Interfaces Directly to Standard CMOS Microprocessors
ISO K Line Pin Protected Against Shorts to Ground
Thermal Shutdown with Hysteresis
Maximum Transmission Speeds in Excess of 50 k Baud
ISO K Line Pin Capable of High Currents
ISO K Line Can Be Driven with up to 10 nF of Parasitic Capacitance
8.0 kV ESD Protection Attainable with Few Additional Components
Standby Mode: No VBat Current Drain with VDD at 5.0 V
Low Current Drain During Operation with VDD at 5.0 V
January, 2011, Rev. 01

1 page




IL33290 pdf
IL33290
Static Electrical Characteristics (continued)
Characteristics noted under conditions of 4.75 V ≤ VDD ≤ 5.25 V, 8.0 V ≤ VBB ≤ 18 V, -40°C ≤ TC ≤ 125°C,
unless otherwise noted.
Notes
15. ISO ramped from 0.8 VBB to 0.4 VBB, Monitor RX, Value of ISO voltage at which RX transitions to 0.3 VDD.
16. ISO ramped from 0.4 VBB to 0.8 VBB, Monitor RX, Value of ISO voltage at which RX transitions to 0.7 VDD.
17. Input Hysteresis, VHys(ISO) = VIH(ISO) - VIL(ISO).
18. ISO has internal current limiting.
January, 2011, Rev. 01

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet IL33290.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IL33290ISO K Line Serial Link InterfaceIK Semiconductor
IK Semiconductor
IL33290DMICROCIRCUIT ISO of K Line INTERFACEIntegral
Integral

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar