|
|
Número de pieza | ASM1832 | |
Descripción | Power Supply Monitor and Reset Circuit | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ASM1832 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! ASM1832
3.3 V mP Power Supply
Monitor and Reset Circuit
Description
The ASM1832 is a fully integrated microprocessor supervisor. It
can halt and restart a “hung−up” microprocessor, restart a
microprocessor after a power failure. It has a watchdog timer and
external reset override. RESET and RESET outputs are push−pull.
A precision temperature−compensated reference and comparator
circuits monitor the 3.3 V, VCC input voltage status. During power−up
or when the VCC power supply falls outside selectable tolerance
limits, both RESET and RESET become active. When VCC rises
above the threshold voltage, the reset signals remain active for an
additional 250 ms minimum, allowing the power supply and system
microprocessor to stabilize. The trip point tolerance signal, TOL,
selects the trip level tolerance to be either 10% or 20%.
A debounced manual reset input, PBRST, activates the reset outputs
for a minimum period of 250 ms. There is a watchdog timer to stop and
restart a microprocessor that is “hung−up”. The watchdog timeouts
periods are selectable: 150 ms, 610 ms, and 1200 ms. If the ST input is
not strobed LOW before the time−out period expires, a reset is
generated.
Devices are available in 8−pin PDIP, 8−pin SO and compact 8−pin
MicroSO packages.
Features
• 3.3 V Supply Monitor
• Push−pull Output
• Selectable Watchdog Period
• Debounce Manual Push−button Reset Input
• Precision Temperature−compensated Voltage Reference and
Comparator
• Power−up, Power−down and Brown Out Detection
• 250 ms Minimum Reset Time
• Active LOW and HIGH Reset Signal
• Selectable Trip Point Tolerance: 10% or 20%
• Low−cost 8−pin DIP/SO and 8−pin Micro SO Packages
• Wide Operating Temperature: −40°C to +85°C
Applications
• Microprocessor Systems
• Computers
• Controllers
• Portable Instruments
• Automotive Systems
http://onsemi.com
PDIP−8
NO SUFFIX
CASE 646AA
MICRO−8
U SUFFIX
CASE 846AA
SOIC−8
S SUFFIX
CASE 751BD
PIN CONFIGURATION
1
PBRST
TD ASM1832
TOL
VCC
ST
RESET
GND
RESET
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2011
August, 2011 − Rev. 3
1
Publication Order Number:
ASM1832/D
1 page ASM1832
Figure 6. Timing Diagram: Pushbutton Reset
Figure 7. Application Circuit: Pushbutton Reset
Watchdog Timer and ST Input
A watchdog timer stops and restarts a microprocessor that
is “hung−up”. The mP must toggle the ST input within a set
period (as selectable through TD input) to verify proper
software execution. If the ST is not toggled low within the
minimum timeout period, reset signals become active. On
power−up after the supply voltage returns to an in−tolerance
condition, the reset signal remains active for 250 ms
minimum, allowing the power supply and system
microprocessor to stabilize.
ST Pulses as short as 20 ns can be detected.
Figure 8. Timing Diagram: Strobe Input
Timeouts periods of approximately 150 ms, 610 ms or
1,200 ms are selected through the TD pin.
Table 5.
TD Voltage
Level
Watchdog Time−out Period (ms)
Min Nom Max
GND
62.5 150 250
Floating
250 610 1000
VCC
500
1200
2000
The watchdog timer can not be disabled. It must be
strobed with a high−to−low transition to avoid watchdog
timeout and reset.
Figure 9. Application Circuit: Watchdog Timer
http://onsemi.com
5
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet ASM1832.PDF ] |
Número de pieza | Descripción | Fabricantes |
ASM1832 | 3.3V UP Power Supply Monitor and Reset Circuit | Alliance Semiconductor |
ASM1832 | Power Supply Monitor and Reset Circuit | ON Semiconductor |
ASM1834 | Dual 5V and 3.3V uP Power Supply Supervisor | Alliance Semiconductor |
ASM1834 | Power Supply Supervisor | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |