DataSheet.es    

PDF EM6J1 Datasheet ( Hoja de datos )

Número de pieza EM6J1
Descripción 1.2V Drive Pch MOSFET
Fabricantes Rohm 
Logotipo Rohm Logotipo

Total 5 Páginas
		
EM6J1 Hoja de datos, Descripción, Manual
1.2V Drive Pch MOSFET
EM6J1
zStructure
Silicon P-channel MOSFET
zFeatures
1) Two Pch MOSFET are put in EMT6 package.
2) High-speed switching.
3) Ultra low voltage drive (1.2V drive).
4) Built-in G-S Protection Diode.
zApplications
Switching
zDimensions (Unit : mm)
EMT6
SOT-563
Abbreviated symbol : J01
Each lead has same dimensions
zPackaging specifications
Type
EM6J1
Package
Code
Basic ordering unit (pieces)
Taping
T2R
8000
zInner circuit
(6) (5)
(4)
1
2 2
1
(1) (2)
1 ESD PROTECTION DIODE
2 BODY DIODE
(3)
(1) Tr1 Source
(2) Tr1 Gate
(3) Tr2 Drain
(4) Tr2 Source
(5) Tr2 Gate
(6) Tr1 Drain
zAbsolute maximum ratings (Ta=25°C)
<It is the same ratings for the Tr1 and Tr2.>
Parameter
Symbol
Drain-source voltage
Gate-source voltage
Drain current
Continuous
Pulsed
Source current
(Body Diode)
Continuous
Pulsed
Total power dissipation
VDSS
VGSS
ID
IDP1
IS
ISP1
PD2
Channel temperature
Tch
Range of storage temperature
Tstg
1 Pw 10µs, Duty cycle 1%
2 Each terminal mounted on a recommended land
Limits
20
±10
±200
±800
100
800
150
120
150
55 to +150
Unit
V
V
mA
mA
mA
mA
mW / TOTAL
mW / ELEMENT
°C
°C
zThermal resistance
Parameter
Channel to ambient
Each therminal mounted on a recommended land
Symbol
Rth (ch-a)
Limits
833
1042
Unit
°C / W / TOTAL
°C / W / ELEMENT
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
1/4
2009.05 - Rev.A

1 page

EM6J1 pdf
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of
any of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
R0039A

5 Page



PáginasTotal 5 Páginas
PDF Descargar[ EM6J1.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
EM6J11.2V Drive Pch MOSFETRohm
Rohm

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2018   |  Privacy Policy  |  Contacto  |  Buscar