|
|
Número de pieza | N140BGE-L23 | |
Descripción | TFT LCD Module | |
Fabricantes | CHIMEI Innolux | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de N140BGE-L23 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! PRODUCT SPECIFICATION
Doc. Number:
□ Tentative Specification
□ Preliminary Specification
▓ Approval Specification
MODEL NO.: N140BGE
SUFFIX: L23
Customer: common model
APPROVED BY
SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
signature and comments.
Approved By
楊竣傑
2013-04-08
18:18:48 CST
Checked By
曹文彬
2013-03-29
10:10:34 CST
Prepared By
王淑玲
2013-03-28
20:09:17 CST
Version 3.1
19 April 2013
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
1 / 35
1 page PRODUCT SPECIFICATION
3. ABSOLUTE MAXIMUM RATINGS
3.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Symbol
Value
Min. Max.
Storage Temperature
TST
Operating Ambient Temperature
TOP
Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).
-20
0
+60
+50
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10 Storage Range
Unit Note
ºC (1)
ºC (1), (2)
-40 -20
0 20 40 60 80
Temperature (ºC)
3.2 ELECTRICAL ABSOLUTE RATINGS
3.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage
Logic Input Voltage
Converter Input Voltage
Converter Control Signal Voltage
Converter Control Signal Voltage
VCCS
VIN
LED_VCCS
LED_PWM,
LED_EN
Value
Min. Max.
-0.3 +4.0
-0.3 VCCS+0.3
-0.3 26.0
-0.3 5.0
-0.3 5.0
Unit
V
V
V
V
V
Note
(1)
(1)
(1)
(1)
Note (1) Stresses beyond those listed in above “ELECTRICAL ABSOLUTE RATINGS” may cause
permanent damage to the device. Normal operation should be restricted to the conditions
described in “ELECTRICAL CHARACTERISTICS”.
Version 3.1
19 April 2013
5 / 35
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
5 Page PRODUCT SPECIFICATION
VLED rising time is 0.5ms
0.5ms
90%
LED_VCC 0V
10%
LED_PWM 0V
LED_EN
0V
ILEDRush
ILED
100ms
ILEDIS
Note (2) If PWM control frequency is applied in the range less than 1KHz, the “waterfall” phenomenon on
the screen may be found. To avoid the issue, it’s a suggestion that PWM control frequency should
follow the criterion as below.
PWM control frequency fPWM should be in the range
(N + 0.33) ∗ f ≤ fPWM ≤ (N + 0.66) ∗ f
N : Integer (N ≥ 3)
f : Frame rate
Note (3) The specified LED power supply current is under the conditions at “LED_VCCS = Typ.”, Ta = 25
± 2 ºC, fPWM = 200 Hz, Duty=100%.
Version 3.1
19 April 2013
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
11 / 35
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet N140BGE-L23.PDF ] |
Número de pieza | Descripción | Fabricantes |
N140BGE-L21 | TFT LCD Module | CHIMEI Innolux |
N140BGE-L22 | TFT LCD Module | CHIMEI Innolux |
N140BGE-L23 | TFT LCD Module | CHIMEI Innolux |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |