DataSheet.es    


PDF SP8K33 Data sheet ( Hoja de datos )

Número de pieza SP8K33
Descripción 4V Drive Nch+Nch MOSFET
Fabricantes ROHM Semiconductor 
Logotipo ROHM Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de SP8K33 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! SP8K33 Hoja de datos, Descripción, Manual

Transistors
4V Drive Nch+Nch MOSFET
SP8K33
SP8K33
zStructure
Silicon N-channel MOSFET
zDimensions (Unit : mm)
SOP8
zFeatures
1) Low on-resistance.
2) Built-in G-S Protection Diode.
3) Small surface Mount Package (SOP8).
zApplication
Switching
Each lead has same dimensions
zPackaging specifications
Type
SP8K33
Package
Code
Basic ordering unit (pieces)
Taping
TB
2500
zAbsolute maximum ratings (Ta=25°C)
<It is the same ratings for the Tr1 and Tr2.>
Parameter
Drain-source voltage
Gate-source voltage
Drain current
Continuous
Pulsed
Source current
(Body diode)
Continuous
Pulsed
Total power dissipation
Channel temperature
Range of storage temperature
1 Pw 10µs, Duty cycle 1%
2 Mounted on a ceramic board.
Symbol
VDSS
VGSS
ID
IDP 1
IS
ISP 1
PD 2
Tch
Tstg
Limits
60
±20
±5.0
±20
1.0
20
2.0
150
55 to +150
zInner circuit
(8) (7)
(6) (5) (8) (7) (6) (5)
2 2
(1) (2) (3) (4)
1 1
(1) (2)
(3) (4)
1 ESD PROTECTION DIODE
2 BODY DIODE
(1) Tr1 Source
(2) Tr1 Gate
(3) Tr2 Source
(4) Tr2 Gate
(5) Tr2 Drain
(6) Tr2 Drain
(7) Tr1 Drain
(8) Tr1 Drain
A protection diode is included between the gate and
the source terminals to protect the diode against static
electricity when the product is in use. Use the protection
circuit when the fixed voltages are exceeded.
Unit
V
V
A
A
A
A
W/TOTAL
°C
°C
1/4

1 page




SP8K33 pdf
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
THE AMERICAS / EUROPE / ASIA / JAPAN
www.rohm.com
Contact us : webmaster@ rohm.co.jp
Copyright © 2008 ROHM CO.,LTD.
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet SP8K33.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SP8K3TransistorROHM Semiconductor
ROHM Semiconductor
SP8K314V Drive Nch+Nch MOSFETROHM Semiconductor
ROHM Semiconductor
SP8K31FRA4V Drive Nch+Nch MOSFETROHM Semiconductor
ROHM Semiconductor
SP8K324V Drive Nch+Nch MOSFETROHM Semiconductor
ROHM Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar