|
|
PDF NTC100K Data sheet ( Hoja de datos )
| Número de pieza | NTC100K | |
| Descripción | Temperature sensor | |
| Fabricantes | Danfoss | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NTC100K (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
Datablad
Data sheet
Temperature sensor NTC 100 K for solar heating controller SH-E01
Temperature sensor NTC 100 K for
solar heating controller SH-E01
General
Ordering
Technical data
Resistance value,
NTC 100K
Solar heating controller type SH-E01 uses
the differential temperature between two
temperature sensors to control the transfer of
heat energy from a Solar collector to a hot
water storage tank.
These temperature sensors are thermally
sensitive semiconductor resistors which show
a decrease in resistance as temperature
increases. In this application the sensors are
used in accordance with their zero-power
characteristics.
Sensor units consist of an NTC (negative
temperature coefficient) 100 K resistance
element which is then encapsulated in a
sealed Copper tube.
The sensor is adjusted to meet the tolerance
requirements of BS EN 60751.
Type
NTC 100K temperature sensor
Spare parts and accessories
Type
Sensor pocket, brass
Sensor pocket, brass
Heat conduction compound
Heat conduction compound
Temperature range Cable length
–40 to 200°C
3m
Ordering no.
088H2050
Description
Length 112 mm
Length 182 mm
5g
0.9 kg
Ordering no.
993N3568
993N3569
041E0110
041E0111
Sensor enclosure:
Rating:
Body:
Diameter:
Length:
IP 68 (totally sealed)
C105 Copper tube
8 mm
50 mm
Cable:
0.5 m of B-type PTFE wire 16/0.2 to BS 3G 210 with maximum temperature ratings of –75 to 260°C.
This is enclosed in Vidaflex S100, Class H (180°C) sleeving rated for short term temperatures up to
250°C at the sensor end.
Joined to 2.5 m of PVC cable rated for 105°C with 3.75 kV insulation.
Resistance –Temperature data for a
Siemens Masushita NTC thermister type:
B57550-G104-F2
R/T curve
R at 25°C
B (0/100)
Rx at 25°C
8404
100000 ohms
4036 |K|
100000 ohms
1%(+/-)
1%(+/-)
Tolerance of the NTC thermister:
+/- 1°C
+/- 2.5°C
+/- 3.5°C
greater than –40°C
greater than 90°C
greater than 150°C
and less than or equal to 90°C
and less than or equal to 150°C
and less than or equal to 200°C
VD.78.T1.02 © Danfoss 04/00
1
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet NTC100K.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NTC100D-9 | NTC THERMISTOR |  ETC |
| NTC100K | Temperature sensor | Danfoss |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |