DataSheet.es    


PDF LC03-3.3BTG Data sheet ( Hoja de datos )

Número de pieza LC03-3.3BTG
Descripción TVS Diode Arrays
Fabricantes Littelfuse 
Logotipo Littelfuse Logotipo



Hay una vista previa y un enlace de descarga de LC03-3.3BTG (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! LC03-3.3BTG Hoja de datos, Descripción, Manual

TVS Diode Arrays (SPA® Diodes)
Lightning Surge Protection - LC03-3.3 Series
LC03-3.3 Series 3.3V 150A Diode Array
Pinout
18
27
36
45
SOIC-8 (Top View)
Functional Block Diagram
Line in
Pin 1 and 8
Line out
Pin 2, 3, 6,
and 7
Line in
Pin 4 and 5
Additional Information
Line out
Datasheet
Resources
Samples
Life Support Note:
Not Intended for Use in Life Support or Life Saving Applications
The products shown herein are not designed for use in life sustaining or life saving
applications unless otherwise expressly indicated.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/30/15
RoHS Pb GREEN
Description
This LC03-3.3 series provides overvoltage protection for
applications such as 10/100/1000 BaseT Ethernet, and
T3/E3 interfaces. This new protector combines the TVS
diode element with a diode rectifier bridge to provide both
longitudinal and differential protection in one package.
This design results in a capacitive loading characteristic
that is log-linear with respect to the signal voltage across
the device. This reduces intermodulation (IM) distortion
caused by a typical solid-state protection solution. The
application schematic provides the connection information
and the LC03-3.3 is rated for GR-1089, intra-building
transient immunity requirements for telecommunication
installations.
Features
• Lightning Protection,
IEC61000-4-5, 150A
(tp=8/20µs)
• EFT, IEC61000-4-4, 40A
(tp=5/50ns)
• Low insertion loss, log-
linear capacitance
• Low clamping voltage
• SOIC-8 surface mount
package (JEDEC MS-012)
• Combined longitudinal
and metallic protection
• Clamping speed of
nanoseconds
• UL 94V-0 epoxy molding
• RoHS compliant
Applications
• T1/E1 Line cards
• T3/E3 and DS3 Interfaces
• STS-1 Interfaces
• 10/100/1000 BaseT
Ethernet
Application Example
TeleLink (0461 1.25)
LC03-3.3BTG
18
2
7
to chipset
(Ethernet PHY,
T3/E3 PHY, etc.)
36
45
This schematic shows a high-speed data interface
protection solution. The LC03-3.3BTG is compatible with
the intra-building surge requirements of Telcordia’s GR-
1089-CORE, and the Basic Level Recommendations of
ITU K.20 and K.21. The TeleLink fuse provides overcurrent
protection for the long term 50/60 Hz power fault events.

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet LC03-3.3BTG.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LC03-3.3BTGTVS Diode ArraysLittelfuse
Littelfuse

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar