DataSheet.es    


PDF 1.5KE400A Data sheet ( Hoja de datos )

Número de pieza 1.5KE400A
Descripción Unidirectional & Bidirectional Transient Voltage Suppressors
Fabricantes Microsemi 
Logotipo Microsemi Logotipo



Hay una vista previa y un enlace de descarga de 1.5KE400A (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! 1.5KE400A Hoja de datos, Descripción, Manual

SCOTTSDALE DIVISION
1N6267 thru 1N6303A
1.5KE6.8 thru 1.5KE400A
Unidirectional & Bidirectional
Transient Voltage Suppressors
DESCRIPTION
APPEARANCE
The Transient Voltage Suppressor (TVS) series for 1N5908 & 1N6267-1N6303A
are JEDEC registered selections for unidirectional devices. The popular series
of 1.5KE6.8-1.5KE400A offers similar voltages with an extended voltage range
and also provides bidirectional options with a C or CA suffix. All have the same
high Peak Pulse Power rating of 1500 W and extremely fast response time.
They can protect from secondary lightning effects per IEC61000-4-5 and class
levels described herein as well as inductive switching environments and induced
RF protection. Since their response time is virtually instantaneous, they can also
protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
CASE 1
FEATURES
APPLICATIONS / BENEFITS
Economical TVS series for thru-hole mounting
Available in both Unidirectional and Bidirectional (add
C or CA suffix for bi-directional)
Voltages from 6.8 to 400 V Breakdown (VBR)
Suppresses transients up to 1500 watts @ 10/1000 µs
(see Figure 1)
Fast response
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers.
Surface mount equivalent packages are available as
SMCJ5.0 - SMCJ170CA or SMCG5.0 - SMCG170CA
(consult factory for other surface mount options)
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
Protection from switching transients and induced RF
Protection from ESD and EFT per IEC 61000-4-2 and
IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1: 1.5KE6.8A to 1.5KE200A or CA *
Class 2: 1.5KE5.0A to 1.5KE180A or CA *
Class 3: 1.5KE5.0A to 1.5KE91A or CA *
Class 4: 1.5KE5.0A to 1.5KE43A or CA *
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1 : 1.5KE5.0A to 1.5KE110A or CA *
Class 2: 1.5KE5.0A to 1.5KE56A or CA *
Class 3: 1.5KE5.0A to 1.5KE27A or CA *
Class 4: 1.5KE5.0A to 1.5KE13A or CA *
Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2: 1.5KE5.0A to 1.5KE24A or CA *
Class 3: 1.5KE5.0 to 1.5KE12A or CA *
* Also applies to 1N5908 and 1Nxxxx of same voltage
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25ºC: 1500 watts at
10/1000 µs (also see Fig 1,2, and 3)
Impulse repetition rate (duty factor): 0.01%
tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65ºC to +150ºC
Thermal Resistance: 22ºC/W junction to lead at 3/8
inch (10 mm) from body, or 82ºC/W junction to ambient
when mounted on FR4 PC board with 4 mm2 copper
pads (1oz) and track width 1 mm, length 25 mm
Steady-State
or 1.52 watts
Power
at TA =
dissipation:
25ºC when
5 watts
mounted
at TL = 40oC,
on FR4 PC
board described for thermal resistance
Forward Surge: 200 Amps peak impulse of 8.3 ms
half-sine wave at 25ºC (unidirectional only)
Solder temperatures: 260 ºC for 10 s (maximum)
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
TERMINATIONS: Tin-lead plated solderable per
MIL-STD-750, method 2026
POLARITY: Cathode indicated by band. No
marking on bidirectional devices
MARKING: Part number
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
WEIGHT: 1.5 grams (approximate)
See package dimensions on last page
Copyright 2002
6-09-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1

1 page




1.5KE400A pdf
SCOTTSDALE DIVISION
1N6267 thru 1N6303A
1.5KE6.8 thru 1.5KE400A
Unidirectional & Bidirectional
Transient Voltage Suppressors
PACKAGE DIMENSIONS
FIGURE 4 Typical Capacitance vs.
Breakdown Voltage
NOTE: Dimensions are in inches
mm
Copyright 2002
6-09-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 5

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet 1.5KE400A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
1.5KE400HYB 39S16400CT-8Won-Top Electronics
Won-Top Electronics
1.5KE400TRANSZORB TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
1.5KE4001500 Watt Transient Voltage Suppressors 6.8 to 400 VoltsMicro Commercial Components
Micro Commercial Components
1.5KE4001500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORSBytes
Bytes

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar