|
|
PDF D2198 Data sheet ( Hoja de datos )
| Número de pieza | D2198 | |
| Descripción | NPN Transistor - 2SD2198 | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de D2198 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number : EN3149A
2SB1449 / 2SD2198
SANYO Semiconductors
DATA SHEET
PNP / NPN Epitaxial Planar Silicon Transistors
2SB1449 / 2SD2198 High-Current Switching
Applications
Features
• Surface mount type device making the following possible.
- Reduction in the number of manufacturing processes for 2SB1449/2SD2198-applied equipment.
- High density surface mount applications.
- Small size of 2SB1449/2SD2198-applied equipment.
• Low collector-to-emitter saturation voltage.
Specifications ( ) : 2SB1449
Absolute Maximum Ratings at Ta=25°C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
Tc=25°C
Electrical Characteristics at Ta=25°C
Conditions
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Output Capacitance
Symbol
ICBO
IEBO
hFE1
hFE2
fT
Cob
Conditions
VCB=(--)40V, IE=0A
VEB=(--)4V, IC=0A
VCE=(--)2V, IC=(--)1A
VCE=(--)2V, IC=(--)3A
VCE=(--)5V, IC=(--)1A
VCB=(--)10V, f=1MHz
* : The 2SBB1449 / 2SD2198 are classified by 1A hFE as follows :
Rank
Q
R
S
hFE 70 to 140 100 to 200 140 to 280
Ratings
(--)60
(--)50
(--)6
(--)5
(--)9
1.65
30
150
--55 to +150
Unit
V
V
V
A
A
W
W
°C
°C
min
70*
30
Ratings
typ
max
(--)0.1
(--)0.1
280*
Unit
mA
mA
30 MHz
(160)100
pF
Continued on next page.
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
71006FA MS IM B-5893 / 41504TN (PC) / O1598HA (KT) / 7039MO, TS No.3149-1/5
1 page  
2SB1449 / 2SD2198
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state,
and are not guarantees of the performance, characteristics, and functions of the described products
as mounted in the customer's products or equipment. To verify symptoms and states that cannot be
evaluated in an independent device, the customer should always evaluate and test devices mounted
in the customer's products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate
and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
This catalog provides information as of July, 2006. Specifications and information herein are subject
to change without notice.
PS No.3149-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet D2198.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| D2196 | NPN Transistor - 2SD2196 |  Shindengen Electric |
| D2198 | NPN Transistor - 2SD2198 | Sanyo |
| D2199 | NPN Transistor - 2SD2199 | Sanyo |
| D219A | Diode (spec sheet) |  American Microsemiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |