|
|
PDF D2131 Data sheet ( Hoja de datos )
| Número de pieza | D2131 | |
| Descripción | NPN Transistor - 2SD2131 | |
| Fabricantes | Toshiba | |
| Logotipo |  |
|
1. D2131  Hay una vista previa y un enlace de descarga de D2131 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
TOSHIBA Transistor Silicon NPN Triple Diffused Type (Darlington)
2SD2131
2SD2131
High-Power Switching Applications
Hammer Drive, Pulse Motor Drive Applications
Unit: mm
• High DC current gain: hFE = 2000 (min) (VCE = 3 V, IC = 3 A)
• Low saturation voltage: VCE (sat) = 1.5 V (max) (IC = 3 A)
• Zener diode included between collector and base.
• Unclamped inductive load energy: E = 150 mJ (min)
Absolute Maximum Ratings (Tc = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
DC
Pulse
Base current
Collector power
dissipation
Ta = 25°C
Tc = 25°C
Junction temperature
Storage temperature range
VCBO
VCEO
VEBO
IC
ICP
IB
PC
Tj
Tstg
60 ± 10
60 ± 10
7
5
8
0.5
2.0
30
150
−55 to 150
V
V
V
A
A
W
°C
°C
JEDEC
―
JEITA
SC-67
TOSHIBA
2-10R1A
Weight: 1.7 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Equivalent Circuit
Collector
Base
≈ 5 kΩ
≈ 150 Ω
Emitter
1 2006-11-21
1 page  
2SD2131
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
20070701-EN
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2006-11-21
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet D2131.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| D213 | Single & Dual Output Miniature 2W SIP DC/DC Converters |  ETC |
| D2131 | NPN Transistor - 2SD2131 | Toshiba |
| D2132 | NPN SIlicon Transistor |  ROHM Semiconductor |
| D2135 | Silicon NPN Power Transistor |  Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |