|
|
Número de pieza | 2SC4399 | |
Descripción | NPN Epitaxial Planar Silicon Transistors | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 2SC4399 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! Ordering number : ENN3020
2SC4399
NPN Epitaxial Planar Silicon Transistors
High-Frequency General-Purpose
Amplifier Applications
Features
· High power gain : PG=25dB typ (f=100MHz).
· Ultrasmall-sized package permitting the 2SC4399-
applied sets to be made small and slim.
Package Dimensions
unit:mm
2059B
[2SC4399]
0.3
3
0.15
0 to 0.1
12
0.65 0.65
2.0
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
PC
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Conditions
Parameter
Symbol
Conditions
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Reverse transfer Capacitance
Base-to-Collector Time Constant
Power Gain
Noise Figure
ICBO
IEBO
hFE
fT
Cre
rbb'Cc
PG
NF
VCB=10V, IE=0
VEB=4V, IC=0
VCE=6V, IC=1mA
VCE=6V, IC=1mA
VCB=6V, f=1MHz
VCB=6V, IC=1mA, f=31.9MHz
VCB=6V, IC=1mA, f=100MHz
VCB=6V, IC=1mA, f=100MHz
* : The 2SC4399 is classified by 1mA hFE as follows :
Marking : F
hFE rank : 3, 4, 5
Rank
hFE
3
60 to 120
4
90 to 180
5
135 to 270
0.3 0.6
0.9
1 : Base
2 : Emitter
3 : Collector
SANYO : MCP
Ratings
30
20
5
30
150
150
–55 to +150
Unit
V
V
V
mA
mW
˚C
˚C
Ratings
min typ
60*
200 320
0.9
12
25
3.0
max
0.1
0.1
270*
1.2
20
Unit
μA
μA
MHz
pF
ps
dB
dB
© 2011, SCILLC. All rights reserved.
Jan-2011, Rev. 0
www.onsemi.com
Publication Order Number:
2SC4399/D
1 page 2SC4399
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of
the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. SCILLC strives to supply
high-quality high-reliability products and recommends adopting safety measures when designing equipment to avoid accidents or malfunctions. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications
can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals," must be validated for each customer application by customer’s
technical experts. SCILLC shall not be held liable for any claim or suits with regard to a third party’s intellectual property rights which has resulted from the use of the technical information and
products mentioned above. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components
in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create
a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affi liates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affi rmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada.
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
ON Semiconductor Website:www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
2SC4399/D
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet 2SC4399.PDF ] |
Número de pieza | Descripción | Fabricantes |
2SC4390 | NPN Epitaxial Planar Silicon Transistor | Sanyo Semicon Device |
2SC4390 | NPN Epitaxial Planar Silicon Transistor | Kexin |
2SC4391 | Silicon NPN epitaxial planer type(For low-frequency output amplification) | Panasonic Semiconductor |
2SC4391 | Silicon PNP Epitaxial Transistor | Panasonic Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |