DataSheet.es    


PDF OMH3075S Data sheet ( Hoja de datos )

Número de pieza OMH3075S
Descripción High Reliability Hallogic Hall-Effect Sensors
Fabricantes OPTEK 
Logotipo OPTEK Logotipo



Hay una vista previa y un enlace de descarga de OMH3075S (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! OMH3075S Hoja de datos, Descripción, Manual

High Reliability Hallogic Hall-Effect Sensors
OMH090 OMH3019, OMH3020, OMH3040, OMH3075,
OMH3131 (B, S versions)
Features:
 Designed for non-contact switching operations
 Operates over a broad range of supply voltages
 Excellent temperature stability operates in harsh environments
 Suitable for military and space applications
 Processing patterned after class B or S of MIL-STD-883
 Through Hole 0.40” [10.16 mm] lead length minimum
 Surface Mount 0.125” [3.18 mm] lead length
 ESD Rating of Class 3B per MIL-STD-883G, M3015.7, HB model.
Ceramic Package
Description:
These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear
amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic® silicon chip. Included on-chip is a band-
gap voltage regulator that allows operation with a wide range of supply voltages. These devices feature logic level
output and provide up to 21 mA of sink current. This allows direct driving of more than 7 TTL loads or any
standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching
frequencies from DC to over 200 kHz.
The Uni-Polar turns on with a (logic level “0”) after a sufficient magnetic field from the south pole of a magnet
approaches the symbolized face of the device (operating point) and turns off (logic level “1”) after the magnetic
field reaches a minimum value. The Bi-Polar device turns on (logic level “0”) in the presence of a magnetic south
pole and turns off (logic level “1”) when subjected to a magnetic north pole. Both magnetic poles are necessary for
operation for Bi-Polar devices. This feature makes these sensors ideal for applications in non-contact switching
operations, brushless DC motors and for use with multiple pole magnets.
B and S devices are processed to OPTEK’s military screening program patterned after MIL-STD-883. This
product has passed Radiation Hardness testing up to 350 Krad (si) per MIL-STD-883 method 1019.6 and up to
150 Krad (si) for ELDRS.
Contact your local representative or OPTEK for more information.
Applications:
 Non-contact switching operations
 Brushless DC motors
 Multiple pole magnets
 Non-contact reflective object sensor
 Assembly line automation
 Machine automation
 Machine safety
 End of travel sensor
 Door sensor
Pin #
1
2
3
Description
VCC
Ground
Output
* Add capacitor for stable operation
Lead finish = Solder Dipped (Sn 63/37)
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue I 8/2014
Page 1 of 7

1 page




OMH3075S pdf
High Reliability Hallogic Hall-Effect Sensors
OMH090 OMH3019, OMH3020, OMH3040, OMH3075,
OMH3131 (B, S versions)
Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted)
OMH3075, OMH3075B, OMH3075S Bi-Polar Latching
SYMBOL
PARAMETER
BOP Magnetic Operate Point(1)
BRP Magnetic Release Point
BH Magnetic Hysteresis
ICC Supply Current
VOL Output Saturation Voltage
IOH Output Leakage Current
MIN TYP
50 150
25 -
-250 -150
-275 -
100 250
50 -
-4
--
--
- 100
--
- 0.10
MAX
250
275
-50
-25
500
-
8
8
10
500
400
400
1.0
UNITS
TEST CONDITIONS
Gauss
+25°C
-55°C & +125°C
Gauss
+25°C
-55°C & +125°C
Gauss
+25°C
-55°C & +125°C
+25°C, VCC = 24 V, Output On, B 250 Gauss
mA +125°C
-55°C
-55°C
mV +25°C, VCC = 4.5 V, IOL = 20 mA, B 250 Gauss
+125°C
µA VCC= 24 V, VOUT = 24 V, B 250 Gauss
tr Output Rise Time
tf Output Fall Time
- 0.21 1
- 0.10 1
µs
RL = 820 , CL = 20 pF, Vcc = 12 V
(guaranteed not tested)
µs
Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted)
OMH3131, OMH3131B & OMS3131S Uni-Polar
SYMBOL
PARAMETER
BOP Magnetic Operate Point(1)
BRP Magnetic Release Point
BH Magnetic Hysteresis
ICC Supply Current
VOL Output Saturation Voltage
IOH Output Leakage Current
tr Output Rise Time
tf Output Fall Time
MIN TYP MAX UNITS
TEST CONDITIONS
20
10
60
-
95
150
Gauss
+25°C
-55°C to +125°C
10
5
45
-
85
145
Gauss
+25°C
-55°C to +125°C
5
5
15
-
40
145
Gauss
+25°C
-55°C to +125°C
-4
7
- 100 400
- 0.10 10
mA VCC = 24 V, Output On, B > 250 Gauss
mV VCC = 4.5 V, IOL = 15 mA, B 250 Gauss
µA VCC = 24 V, VOUT = 24 V, B 0 Gauss
- 0.21
- 0.10
1
1
µs RL = 820 , CL = 20 pF, Vcc = 12 V
µs (guaranteed not tested)
Notes:
(1) South pole facing symbolized surface.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue I 8/2014
Page 5 of 7

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet OMH3075S.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
OMH3075High Reliability Hallogic Hall-Effect SensorsOPTEK
OPTEK
OMH3075BHigh Reliability Hallogic Hall-Effect SensorsOPTEK
OPTEK
OMH3075SHigh Reliability Hallogic Hall-Effect SensorsOPTEK
OPTEK

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar