|
|
PDF 7MBP50VDA060-50 Data sheet ( Hoja de datos )
| Número de pieza | 7MBP50VDA060-50 | |
| Descripción | IGBT Module | |
| Fabricantes | Fuji Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 7MBP50VDA060-50 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
http://www.fujielectric.com/products/semiconductor/
7MBP50VDA060-50
IGBT Modules
IGBT MODULE (V series)
600V / 50A / IPM
Features
• Temperature protection provided by directly detecting
the junction temperature of the IGBTs
• Low power loss and soft switching
• High performance and high reliability IGBT with overheating
protection
• Higher reliability because of a big decrease in number of
parts in built-in control circuit
Maximum Ratings and Characteristics
Absolute Maximum Ratings (TC=25ºC, VCC=15V unless otherwise specified)
Items
Symbol
Min.
Collector-Emitter Voltage (*1)
VCES
0
Short Circuit Voltage
VSC 200
DC IC
-
Collector Current
1ms
Icp
-
Duty=100% (*2) -IC
-
Collector Power Dissipation 1 device (*3)
PC
-
Collector Current
DC
1ms
IC
Icp
-
-
Forward Current of Diode
IF
-
Collector Power Dissipation 1 device (*3)
PC
-
Supply Voltage of Pre-Driver (*4)
VCC
-0.5
Input Signal Voltage (*5)
Vin -0.5
Alarm Signal Voltage (*6)
VALM
-0.5
Alarm Signal Current (*7) IALM -
Junction Temperature
Tj -
Operating Case Temperature
Topr
-20
Storage Temperature
Tstg -40
Solder Temperature (*8)
Tsol -
Isolating Voltage (*9)
Viso -
Screw Torque
Terminal (M4)
Mounting (M4)
-
-
Note *1: VCES shall be applied to the input voltage between terminal P-(U,V, W) and (U,V, W, B)-N.
Note *2: Duty=125ºC/Rth(j-c)D /(IF×VF Max.)×100
Note *3: PC=125ºC/Rth(j-c)Q (Inverter & Brake)
Note *4: VCC shall be applied to the input voltage between terminal No.4 and 1, 8 and 5, 12 and 9, 14 and 13.
Note *5: Vin shall be applied to the input voltage between terminal No.3 and 1, 7 and 5, 11 and 9, 15~18 and 13.
Note *6: VALM shall be applied to the voltage between terminal No.2 and 1, 6 and 5, 10 and 9, 19 and 13.
Note *7: IALM shall be applied to the input current to terminal No.2,6,10 and 19.
Note *8: Immersion time 10±1sec. 1time.
Note *9: Terminal to base, 50/60Hz sine wave 1min. All terminals should be connected together during the test.
Max.
600
400
50
100
50
201
30
60
30
126
20
VCC+0.5
VCC
20
150
110
125
260
AC2500
1.7
Units
V
V
A
A
A
W
A
A
A
W
V
V
V
mA
ºC
ºC
ºC
ºC
Vrms
Nm
1
1 page  
7MBP50VDA060-50
Inverter
Collector current vs. Collector-Emitter voltage
Tj=25℃[Chip] (typ.)
100
75 VCC=15V
VCC=17V
VCC=13V
50
25
0
0 0.5 1 1.5 2 2.5 3 3.5
Collector-Emitter voltage ： VCE [ V ]
Collector current vs. Collector-Emitter voltage
Tj=125℃[Chip] (typ.)
100
VCC =15V
75
VCC =17V
VCC =13V
50
25
0
0 0.5 1 1.5 2 2.5 3 3.5
Collector-Emitter voltage ： VCE [ V ]
Forward current vs. Forward voltage
[Chip] (typ.)
100
75
Tj=125℃
Tj=25℃
50
25
0
0 0.5 1 1.5 2 2.5 3 3.5
Forward voltage ： VF [ V ]
5
IGBT Modules
http://www.fujielectric.com/products/semiconductor/
Collector current vs. Collector-Emitter voltage
Tj=25℃[Terminal] (typ.)
100
VCC=15V
75
VCC=17V
VCC=13V
50
25
0
0 0.5 1 1.5 2 2.5 3 3.5
Collector-Emitter voltage ： VCE [ V ]
Collector current vs. Collector-Emitter voltage
Tj=125℃[Terminal] (typ.)
100
VCC =15V
75
VCC =17V
VCC =13V
50
25
0
0 0.5 1 1.5 2 2.5 3 3.5
Collector-Emitter voltage ： VCE [ V ]
Forward current vs. Forward voltage
[Terminal] (typ.)
100
75
Tj=125℃
Tj=25℃
50
25
0
0 0.5 1 1.5 2 2.5 3 3.5
Forward voltage ： VF [ V ]
5 Page 
7MBP50VDA060-50
IGBT Modules
http://www.fujielectric.com/products/semiconductor/
WARNING
1.This Catalog contains the product specifications, characteristics, data, materials, and structures as of May 2011.
The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be
sur to obtain the latest specifications.
2.All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or
implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Co., Ltd. is (or shall be deemed)
granted. Fuji Electric Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged
infringement of other's intellectual property rights which may arise from the use of the applications described herein.
3.Although Fuji Electric Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become
faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent
the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your
design failsafe, flame retardant, and free of malfunction.
4.The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability
requirements.
• Computers
• OA equipment
• Communications equipment (terminal devices)
• Measurement equipment
• Machine tools
• Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc.
5.If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below,
it is imperative to contact Fuji Electric Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate
measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment
becomes faulty.
• Transportation equipment (mounted on cars and ships)
• Trunk communications equipment
• Traffic-signal control equipment
• Gas leakage detectors with an auto-shut-off feature
• Emergency equipment for responding to disasters and anti-burglary devices • Safety devices
• Medical equipment
6.Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment
(without limitation).
• Space equipment
• Aeronautic equipment
• Nuclear control equipment
• Submarine repeater equipment
7.Copyright ©1996-2011 by Fuji Electric Co., Ltd. All rights reserved.
No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Co., Ltd.
8.If you have any question about any portion in this Catalog, ask Fuji Electric Co., Ltd. or its sales agents before using the product.
Neither Fuji Electric Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions
set forth herein.
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet 7MBP50VDA060-50.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 7MBP50VDA060-50 | Power Devices (IGBT) |  ETC |
| 7MBP50VDA060-50 | IGBT Module | Fuji Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |