|
|
Número de pieza | IQS229 | |
Descripción | Single Channel Capacitive Proximity/Touch Controller | |
Fabricantes | Azoteq | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IQS229 (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
No Preview Available ! ProxSense® Series
IQS229 Datasheet
Single Channel Capacitive Proximity/Touch Controller for SAR Applications
The IQS229 ProxSense® IC is a self-capacitance controller designed for devices that are
required to meet SAR regulations. The IQS229 can detect a long term presence through
movement detection algorithms when the device (e.g. tablet or cell phone) is handled.
The IQS229 can be used in any application requiring long-term activation by animated objects.
A movement detection algorithm will indicate the presence of a user and aid in the long-term
stability of the solution. The device operates standalone and can be configured via digital
inputs.
Features
• SAR compliance in mobile devices
according to the IEC 62209-2 ed1.0
standard and the FCC standard (KDB
616217 - D04 SAR for laptop and tablets
v01)
• Failsafe firmware/hardware design
• Automatic Tuning Implementation (ATI) -
Automatic adjustment for optimal sensor
performance
• Minimal external components
• Standalone operation
• 25mm detection distance
• Up to 60pF sensor load
• On-chip movement detection algorithm
• Internal Capacitor Implementation (ICI) –
reference capacitor on-chip
• Configuration settings via external pins
• Activation threshold
• Movement filter threshold
• Activation time-out
• Supply voltage: 1.8V to 3.6V
• Low power consumption: 30uA (sub 10uA
in sleep mode)
• Low profile DFN10 package (3x3)
Applications
• SAR detection for tablets and mobile
phones
• SAR detection for wireless charging
stations (operating frequency > 100 MHz)
• SAR detection for USB dongle-type
devices
• Movement detection devices (anti-theft)
• Reed relay replacement
• White goods and appliances
• Human Interface Devices
• Proximity activated backlighting
• Applications with long-term activation
Copyright © Azoteq 2013
All Rights Reserved
Available Packages
TA DFN10 (3x3)
-40°C to 85°C
IQS229
IQS229 Datasheet v1.0
Page 1 of 15
1 page ProxSense® Series
run which can be run periodically in order to
run with optimal sensitivity.
1.2.3 Movement filters
The movement filter runs continually and
the dedicated digital output will activate for
a time depending on the intensity of the
movement.
1.2.4 External control
The movement output (optional line to
connect to master device) can be used to
signal a “reseed” or “sleep mode”. A short
pulse will force the reference counts (long-
term average) to match the actual counts
(capacitance of sensor). By writing the pin
low for a longer time, will force the IC into
sleep mode for low current consumption
(2uA + required pull-up on movement pin).
In sleep mode the output pin is written low
in order to minimise current consumption.
1.2.5 Low power options
As mentioned in the section above, a
charge halt will initiate the sleep mode. The
device will reset and return to normal power
as soon as the line is released.
1.3 Applicability
All specifications, except where specifically
mentioned otherwise, provided by this
datasheet are applicable to the following
ranges:
Temperature:-40C to +85C
Supply voltage (VDDHI): 1.8V to 3.6V
1.4 Passing the SAR
qualification testing with the
IQS229
For design information on passing the SAR
qualification testing with Azoteq movement
based sensors, please see the application
note: “AZD073 SAR qualification with
Azoteq movement-based sensors”
Copyright © Azoteq 2013
All Rights Reserved
IQS229 Datasheet v1.0
Page 5 of 15
5 Page ProxSense® Series
7 Specifications
7.1 Absolute maximum ratings
The following absolute maximum parameters are specified for the device:
Exceeding these maximum specifications may cause damage to the device.
• Operating temperature
• Supply Voltage (VDDHI – VSS)
• Maximum pin voltage
• Maximum continuous current (for specific Pins)
• Minimum pin voltage
• Minimum power-on slope
• ESD protection
• Package Moisture Sensitivity Level (MSL)
value expected)
-40°C to 85°C
3.6V
VDDHI + 0.5V (may not
exceed VDDHI max)
10mA
VSS - 0.5V
100V/s
±8kV (Human body model)
3 (Package testing in progress, lower
Table 7.1 IQS229 General Operating Conditions1
DESCRIPTION
Supply voltage
Internal regulator output
Default Operating Current
Conditions
1.8 ≤ VDDHI≤ 3.6
3.3V
PARAMETER
VDDHI
VREG
IIQS229NP
MIN
1.8
1.62
-
TYP
3.3V
1.7
100
Low Power Setting 1*
3.3V, LP=32
IIQS229LP32
- <40
MAX
3.6
1.79
UNIT
V
V
µA
µA
Low Power Setting 2*
3.3V, LP=64
IIQS229LP64
- <20
µA
Low Power Setting 3*
3.3V, LP=256
IIQS229LP256
-
<10
µA
*LP interval period = Low power value (LP) x 1ms
Table 7.2 Start-up and shut-down slope Characteristics
DESCRIPTION
Power On Reset
Brown Out Detect
Conditions
VDDHI Slope ≥ 100V/s
@25°C
VDDHI Slope ≥ 100V/s
@25°C
PARAMETER MIN
POR
1.2
BOD
1.15
MAX
1.6
1.6
UNIT
V
V
1Operating current shown in this datasheet does include power dissipation through the recommended 1MΩ strapping resistor on the
OUT pin for failsafe modes.
Copyright © Azoteq 2013
All Rights Reserved
IQS229 Datasheet v1.0
Page 11 of 15
11 Page |
Páginas | Total 15 Páginas | |
PDF Descargar | [ Datasheet IQS229.PDF ] |
Número de pieza | Descripción | Fabricantes |
IQS229 | Single Channel Capacitive Proximity/Touch Controller | Azoteq |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |