DataSheet.es    


PDF OPB755TAZ Data sheet ( Hoja de datos )

Número de pieza OPB755TAZ
Descripción Reflective Object Sensor
Fabricantes OPTEK Technologies 
Logotipo OPTEK Technologies Logotipo



Hay una vista previa y un enlace de descarga de OPB755TAZ (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! OPB755TAZ Hoja de datos, Descripción, Manual

Reflective Object Sensor
OPB750N, OPB750T
OPB755NZ, OPB755TZ, OPB755TAZ
Features:
High contrast ratio (1,000 :1 minimum)
Low cost plastic housing
PCBoard mount (OPB750N, OPB750T)
12” (305 mm) 26 AWG wires (OPB755NZ, OPB755TZ)
Available with no-mounting tabs “N” package
Available with two mounting tabs “T” package
OPB750
Product Photo Here
OPB755TAZ OPB755TZ
Description:
Each sensor in the OPB750 and OPB755 series has a reflective assembly that features a Light
Emitting Diode (LED) and phototransistor output designed to decrease low-level light, while not
affecting the high-level light gain.
The OPB750N and OPB750T devices have are designed for PCBoard mounting with 0.40” (10 mm)
length leads. OPB755NZ, OPB755TZ and OPB755TAZ assemblies are designed for remote
mounting. The OPB755NZ and OPB755TZ have 12” (305 mm) UL rated wire, 26 AWG wire leads
that terminate into an AMP # 3-640442-5 connector. The OPB755TAZ has 24” (610 mm) UL rated
wire, 26 AWG leads. The OPB750T, OPB755TZ and OPB755TAZ have two mounting tabs while
the OPB750N and OPB755NZ have no mounting tabs.
Photologic® output versions are available with the OPB760 and OPB770 series.
Custom electrical, wire and cabling and connectors are available. Contact your local representative
or OPTEK for more information.
Applications:
Non-contact reflective object
sensor
Assembly line automation
Machine automation
Machine safety
End of travel sensor
Ordering Information
Part
Number
LED Peak
Reflection Distance
Wavelength Sensor
Inch
0.080" (2.03 mm)
OPB750N
0.150" (3.81 mm)
890 nm
Transistor
& Rbe
0.220" (5.59 mm)
0.080" (2.03 mm)
OPB750T
0.150" (3.81 mm)
0.220" (5.59 mm)
0.080" (2.03 mm)
OPB755NZ
0.150" (3.81 mm)
0.220" (5.59 mm)
OPB755TZ
890 nm
Transistor
& Rbe
0.080" (2.03 mm)
0.150" (3.81 mm)
0.220" (5.59 mm)
0.080" (2.03 mm)
OPB755TAZ
0.150" (3.81 mm)
0.220" (5.59 mm)
Lead
Length
0.40"
12" / 26
AWG Wire
with
connector
24" / 26
AWG Wire
NO
connector
Tabs
No tabs
2 Tabs
No tabs
2 Tabs
RoHSOPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected]
Issue A.3 05/08
Page 1 of 4

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet OPB755TAZ.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
OPB755TAZReflective Object SensorOPTEK Technologies
OPTEK Technologies

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar