DataSheet.es    

PDF IA2004-CE40A Datasheet ( Hoja de datos )

Número de pieza IA2004-CE40A
Descripción Image sensor heads
Fabricantes Rohm 
Logotipo Rohm Logotipo

Total 5 Páginas
		
IA2004-CE40A Hoja de datos, Descripción, Manual
Contact image sensor heads
IA2004-CE40A
Image sensor heads for narrow-width scanners
IA2004-CE40A
The IA 04-ME/CE series sensors, compatible with A6 size media, feature a dual-arch structure, allowing straight pass
reading (both-directions). In addition, they are compact, measuring only 119.5mm in length.
zApplications
Check readers, card scanners, and a variety of other image input devices.
zFeatures
1) Signal amplifier integrated into each sensor IC in order to eliminate external noise ; compatible with 3.3V interface.
2) LED light source mounted on the same substrate as the sensor chip itself, resulting in a more compact, lightweight
package.
3) Proprietary prism maintains a uniform output signal.
4) Ceramic substrate used, ensuring excellent dimensional and thermal stability.
zDimensions (Unit : mm)
119.5±0.3
109.6 (Effectiv Reading Width :104.6)
CL
No.1 Pixel
3.96±0.5
60±0.3
A
29.75±0.3
5±0.1
φ2±0.05
(Depth 1)
10.7±0.4
15.5±1
25±1
(NOTE 1)
Deflection at the top of glass:0-0.25
Projection to platen is positive.
(NOTE 2)
Socket Housing:IL-Z-9S-S125C3(JAE)
Socket Contact:IL-Z-C3-A-15000(JAE)
No.9
(12.9)
(3.8)
No.1
Pin No.
No.1
No.2
No.3
No.4
No.5
No.6
Signal
CLK
SP
VDD
GND
AO
RLED
Pin No.
No.7
No.8
No.9
Signal
GLED
BLED
VLED
1/4

1 page

IA2004-CE40A pdf
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
THE AMERICAS / EUPOPE / ASIA / JAPAN
www.rohm.com
Contact us : webmaster@ rohm.co.jp
Copyright © 2007 ROHM CO.,LTD.
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0

5 Page



PáginasTotal 5 Páginas
PDF Descargar[ IA2004-CE40A.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
IA2004-CE40AImage sensor headsRohm
Rohm

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2018   |  Privacy Policy  |  Contacto  |  Buscar