|
|
Número de pieza | S50HW-YD01 | |
Descripción | Wide Plasma Display Module | |
Fabricantes | Samsung | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de S50HW-YD01 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Global LCD Panel Exchange Center
www.panelook.com
SDI
mvyGtlzzyzaGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGkh{laGuUGX\UGYWW\GG
G
STANDARD
CUSTOMER’S SPECIFICATIONS
(Approval Edition)
1,269cm (50 Inch) Wide Plasma Display Module
MODEL : S50HW-YD01
( NTSC / PAL )
* This specification will be approved by both Customer and Samsung SDI Co.,Ltd.
* Please return one of this specification with your signature for approval.
Proposed by:
Approved by:
Signature
Vice President Sung Do Kim
Quality Innovation Team,
PDP Business Division,
Signature
SAMSUNG SDI CO.,LTD.
.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
1 page Global LCD Panel Exchange Center
www.panelook.com
SAMSUNG SDI Corporation
1. DESCRIPTION
Plasma Display Panel
The S50HW-YD01 is a 50-inch wide full color plasma display Module with a resolution of
1366(H) Ý 768(V) pixels. The display module includes the Plasma Display Panel,
the Panel Driving Electronics, the Logic Control Board, and the Power Supply Unit(PSU).
2. FEATURES
x Wide aspect ratio(16:9) 50 inch diagonal display screen. The display area is 1106.46mm
wide and 622.08mm high.
x Slim and light weight. The display Module is 63.5mm in depth and weight only approx.
24.8kg include power supply.
x 68719.47 million colors(12Bit), 1073.7 million colors(10Bit), or 16.77 million
colors(8Bit) combination of R,G and B digital data.(according to LVDS input selection)
x High Luminance, High contrast, Wide viewing angle. The screen has a white peak
Luminance of Typical 1,200 cd/້(NTSC), Contrast of Typical 10,000:1(NTSC).
And a viewing angle of greater than 160¶ comparable to those of CRTs.
3. PRODUCT NAME AND MODEL NUMBER
x Product name : 50 inch Full Color Plasma Display Module3
(abbreviation : PDP Module3)
x Model number : S50HW-YD01
4. FUNCTION OUTLINE
x The plasma display Module has an APC(Automatic Power Control) function which
restricts power consumption within the certain value with regard to each display load
ratio.
x The plasma display Module is operated by following digital video signals; Vertical
synchronous signal, Horizontal synchronous signal, Enable signal and 8~12bits data
signal of each R,G, and B color. All signals are based on LVDS level.
x The plasma display Module is operated at 50Hz or 60Hz frame rate. An external frame
rate conversion is required in order to display the other formats.
x The plasma display Module requires several types of input power voltages ; voltage for
LOGIC, voltage for TCP, voltage for Gate Driver, voltage for Sustain, Address, Set,
Scan and X-bias.
x The plasma display Module is operated at progressive signal only.
An external progressive scan conversion is required in order to display the other formats.
x The plasma display Module requires rated 100~240V, 50~60Hz of input power voltage.
SAMSUNG SDI
-5/61 -
Rev.1.0 15/11/05
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
5 Page Global LCD Panel Exchange Center
www.panelook.com
SAMSUNG SDI Corporation
6.5 Display Cell Defect Specification
Plasma Display Panel
In some cases, a panel may have defective cells that cannot be controlled.
These defective cells can be categorized into three types;
(1) Non-lighting cell defect : defect in which the cell is always off
(2) Non-extinguishing cell defect : defect in which the cell is always on.
(3) Flickering cell defect : defect in which the cell is flickering.
(4) High intensity cell defect : defect in which the cell is brighter than other cells
(5) Test Pattern : Full White, Full Red, Full Green and Full Blue with 1023 gray level.
The display cell defect specifications define the allowed limits for display cell defects and
are used as the criteria in determining whether a panel should be shipped.
Item
Non-lighting
cell defect
Non-
extinguishing
cell defect
Flickering
cell defect
Continuous
Cell defect
Total defect
Figure-5. Measurement Area
Number of cell defects
Zone A: 4 and less
Zone B: 9 and less
Zone A: 2
Zone B: 3 and less
Specification
Distance between cell defects
Zone A: 2
Zone B: 3 and less
Zone A: 1
Zone B: 2
Total number of cell defects
GZone A and B is less than 16
Regardless of A and B zone,
Maximum 1 Cell Defect in an area of
50mm*50mm is allowed.
SAMSUNG SDI
-11/61 -
Rev.1.0 15/11/05
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet S50HW-YD01.PDF ] |
Número de pieza | Descripción | Fabricantes |
S50HW-YD01 | Wide Plasma Display Module | Samsung |
S50HW-YD04 | Wide Plasma Display Module | Samsung |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |