|
|
PDF S51FH-YD03 Data sheet ( Hoja de datos )
| Número de pieza | S51FH-YD03 | |
| Descripción | Wide Plasma Display Module | |
| Fabricantes | Samsung | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de S51FH-YD03 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
DMLFOR MESSRS:
2013
TOP
DATE : Mar 15, 13.
CUSTOMER’S SPECIFICATIONS
128.8cm (51 Inch) Wide Plasma Display Module
MODEL : S51FH-YD03
(NTSC/PAL/3D)
* This specification will be approved by both Customer and Samsung SDI Co.,Ltd.
* Please return one of this specification with your signature for approval.
Proposed by:
Approved by:
Signature
General Manager. Changsub, Son
PDP Development Team,
PDP Business Division,
Samsung SDI Co., Ltd
Signature
.
SAMSUNG SDI CO.,LTD.
Revision History
1 page  
SAMSUNG SDI Corporation
1. DESCRIPTION
Plasma Display Panel
The S51FH-YD03 is a 51-inch wide full color plasma display module with a resolution of
1920(H) × 1080(V) pixels. The display module includes the Plasma Display Panel, the
Panel Driving Electronics and the Logic Control Board.
2. FEATURES
• Wide aspect ratio(16:9) 51 inch diagonal display screen. The display area is 1124.928mm
wide and 627.48mm high.
• Slim and light weight. The display Module is 47.2mm in depth and weight only approx.
14kg (M1)
• 68719.47 million colors (12Bit), 1073.7 million colors(10Bit), or 16.77 million colors
(8Bit) combination of R,G and B digital data. (According to LVDS input selection)
• High luminance, high contrast and wide viewing angle.
( Film transmissivity 45.0%, NTSC/PAL),
And a viewing angle of greater than 160° comparable to that achieved
3. PRODUCT NAME AND MODEL NUMBER
• Product name : 51 inch Full Color Plasma Display Module
(abbreviation : PDP Module)
• Model number : S51FH-YD03
4. FUNCTION OUTLINE
• The plasma display module has an APC(Automatic Power Control) function which
restricts power consumption within the certain value with regard to each display load
ratio.
• The plasma display module is operated by following digital video signals; Vertical
synchronous signal, Horizontal synchronous signal, Enable signal and 8~12bit data
signals of each R, G and B color. All signals are based on LVDS level.
• The plasma display module is operated at 50Hz/60Hz frame rate. An external frame rate
conversion is required in order to display the other formats.
• The plasma display module requires several types of input power voltages ; voltage for
logic IC, voltage for Gate Driver, voltage for Sustain and voltage for Address.
• The plasma display module is operated at progressive signal only.
An external progressive scan conversion is required in order to display the other formats.
SAMSUNG SDI
- 5/66 -
Rev.1.0 15/03/2013
5 Page 
SAMSUNG SDI Corporation
6.5 Display Cell Defect Specification
Plasma Display Panel
In some cases, a panel may have defective cells that cannot be controlled.
These defective cells can be categorized into three types;
(1) Dark cell defect : defect in which the cell is always off
(2) Bright cell defect : defect in which the cell is always on.
(3) Flickering cell defect : defect in which the cell is flickering.
※Test Pattern : Full White, Full Red, Full Green and Full Blue with 1024 gray level.
The display cell defect specifications define the allowed limits for display cell defects
and
are used as the criteria in determining whether a panel should be shipped.
W
Zone B
H/4
H Zone A H/2
W/4
W/2 W/4
Figure-5. Measurement Area
H/4
Item Specification
Number of cell defects
Distance between cell defects
For the detail SPEC,
Please contact to CS person of Chenan factory in Korea or Shenzhen factory in china
(Note)
* 1. A cell is composed of 3 pixels (R, G, and B)
* 2. Cell defect : If the number of dead pixels is one or two, it is called cell defect.
SAMSUNG SDI
- 11/66 -
Rev.1.0 15/03/2013
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet S51FH-YD03.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| S51FH-YD03 | Wide Plasma Display Module | Samsung |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |