|
|
Número de pieza | S42AX-YD13 | |
Descripción | Wide Plasma Display Module | |
Fabricantes | Samsung | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de S42AX-YD13 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Global LCD Panel Exchange Center
www.panelook.com
G
G
G
mvyGtlzzyzaG G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G kh{laGq|sGX[SGYWXWG
TOP
CUSTOMER’S SPECIFICATIONS
106.68cm (42 Inch) Wide Plasma Display Module
MODEL:S42AX-YD13(M3)
(NTSC/PAL)
* This specification will be approved by both TOP and Samsung SDI Co.,Ltd.
* Please return one of this specification with your signature for approval.
Proposed by:
Approved by:
Signature
G/Manager. ChangSub, Son
PDP Development Team, PDP Business
Division, Samsung SDI Co., Ltd
Signature
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
1 page Global LCD Panel Exchange Center
SAMSUNG SDI Corporation
www.panelook.com
Plasma Display Panel
1. DESCRIPTION
The S42AX-YB09(M1) and S42AX-YD13 are a 42-inch wide full color plasma display
Module with a resolution of 1024(H) Ý 768(V) pixels. The display module includes the
Plasma Display Panel, the Panel Driving Electronics, the Logic Control Board.
2. FEATURES
x Wide aspect ratio(16:9) 42 inch diagonal display screen. The display area is 933.89mm
wide and 532.22mm high.
x Slim and light weight. The display Module is 45.2mm in depth and weight only
approx. 11.9kg.
x 1073.7 million colors(10Bit), or 16.77 million colors(8Bit) combination of R,G and B
digital data.(According to LVDS input selection)
x High Luminance, High contrast, Wide viewing angle. The screen has a white peak
Luminance of typical 500 cd/້(In Film transmissivity 45.0%, NTSC/PAL),
contrast of typical 10,000:1(NTSC/PAL).
And a viewing angle of greater than 160¶ comparable to that achieved
3. PRODUCT NAME AND MODEL NUMBER
x Product name : 42 inch Full Color Plasma Display Module
(abbreviation : PDP Module)
x Model number : S42AX-YD13(M3) (Project name : U2P)
4. FUNCTION OUTLINE
x The plasma display module has an APC(Automatic Power Control) function which
restricts power consumption within the certain value with regard to each display load
ratio.
x The plasma display module is operated by following digital video signals; Vertical
synchronous signal, Horizontal synchronous signal, Enable signal and 8~12bit data
signals of each R, G and B color. All signals are based on LVDS level.
x The plasma display module is operated at 50Hz60Hz frame rate. An external frame rate
conversion is required in order to display the other formats.
x The plasma display module requires several types of input power voltages ; voltage for
logic IC, voltage for Gate Driver, voltage for Sustain and voltage for Address.
x The plasma display module is operated at progressive signal only.
An external progressive scan conversion is required in order to display the other formats.
SAMSUNG SDI
- 5/64 -
Rev.01 31/12/0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
5 Page Global LCD Panel Exchange Center
www.panelook.com
SAMSUNG SDI Corporation
6.5 Display Cell Defect Specification
Plasma Display Panel
In some cases, a panel may have defective cells that cannot be controlled.
These defective cells can be categorized into three types;
(1) Non-lighting cell defect : defect in which the cell is always off
(2) Non-extinguishing cell defect : defect in which the cell is always on.
(3) Flickering cell defect : defect in which the cell is flickering.
(4) High intensity cell defect : defect in which the cell is brighter than other cells
(5) Test Pattern : Full White, Full Red, Full Green and Full Blue with 1024 gray level.
The display cell defect specifications define the allowed limits for display cell defects
and
are used as the criteria in determining whether a panel should be shipped.
~G
GiG
oV[G
oG GhG oVYG
~V[G
~VYG
~V[G
Figure-5. Measurement Area
oV[G
Item
Non-lighting cell
Non-extinguishing cell
Flickering cell
(the W/R/G/B screen)
Flickering cell
(the other pattern)
High Intensity Cell
Continuous Cell
Total defect
SAMSUNG SDI
Number of cell defects
A Zone
B Zone
3 and less
10 and less
1 and less
2 and less
2 and less
3 and less
1 and less
2 and less
1 and less
2 and less
Remark
Regardless of A and B Zone,
Maximum 1 Cell Defect
in an area of 20*20mm
is allowed.
1 and less
2 and less
14 and less
- 11/64 -
Rev.01 31/12/0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet S42AX-YD13.PDF ] |
Número de pieza | Descripción | Fabricantes |
S42AX-YD13 | Wide Plasma Display Module | Samsung |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |