DataSheet.es    


PDF OPB472T11 Data sheet ( Hoja de datos )

Número de pieza OPB472T11
Descripción Slotted Optical Switch
Fabricantes OPTEK 
Logotipo OPTEK Logotipo



Hay una vista previa y un enlace de descarga de OPB472T11 (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! OPB472T11 Hoja de datos, Descripción, Manual

Photologic® Slotted Optical Switch
OPB460, OPB470, OPB480, OPB490 Series
Features:
 Choice of pins or wires mounting configuration
 Choice of aperture
 Choice of output configuration
 Choice of opaque or IR transmissive shell material
 Data rates to 250 kBaud
 Low power consumption
Description:
The OPB460, OPB470, OPB480 and OPB490 series of Photologic® photo integrated circuit switches provide
optimum flexibility for the design engineer. Building from a standard housing with a 0.125” (3.180 mm) wide slot, a
user can specify the type and polarity of TTL output, discrete shell material, aperture width and choice of mounting
configurations. OPB460 through OPB473 have 0.425” (10.795 mm) PCBoard leads with 0.320” (8.1 mm)
spacing. OPB480 through OPB493 have 24” (609 mm) 26 AWG wires (UL approved wires).
All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be
specified as buffered or inverted with 10 kW Pull-up or Open Collector output. Devices are also TTI/LSTTL
compatible and can drive up to 10 TTL loads.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Mechanical switch replacement
Speed indication (tachometer)
Mechanical limit indication
Edge sensing
Part Number Guide — OPB460, OPB470, OPB480, OPB490 Series
OPB 4 X X X 1 1 X
OPTEK Assembly
Photologic™ Sensor Family
Discrete Housing Material:
6 — Transmissive Shell, PCBoard Mountable
7 — Opaque Shell, PCBoard Mountable
8 — Transmissive Shell, Wire Termination
9 — Opaque Shell, Wire Termination
Electrical Specifications:
0 — Buffered 10 kOutput
1 — Buffered Open-Collector Output
2 — Inverted 10 kOutput
3 — Inverted Open-Collector Output
All PCBoard Versions RoHS Compliant:
Z = Wire Version RoHS Compliant
Sensor Aperture:
1 = 0.010” [0.25 mm]
Emitter Aperture:
1 = 0.010” [0.25 mm]
Mounting Configurations:
L — Emitter side mounting tab only
N — No mounting tabs
P — Sensor side mounting tab only
T — Two mounting tabs
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 06/14
Page 1 of 7

1 page




OPB472T11 pdf
Photologic® Slotted Optical Switch
OPB460, OPB470, OPB480, OPB490 Series
OPB480T55 - Flag Next to Emitter
1.20
1.00
Top to Bottom (Back)
Top to Bottom
OPB480T55 - Flag Next to Sensor
1.20
Top to Bottom (Back)
Top to Bottom
1.00
0.80
0.60
Right to Left (Back)
Right to Left
0.40
0.20
Left to Right
Left to Right (Back)
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
OPB480T55 - Flag in Middle of Slot
1.20
Top to Bottom (Back)
Top to Bottom
1.00
0.80
0.60
Right to Left (Back)
Right to Left
0.40
0.20
Left to Right
Left to Right (Back)
0.80
0.60
Right to Left (Back)
Right to Left
0.40
0.20
Left to Right
Left to Right (Back)
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
0 Top to Bottom
Left to Right
Emitter
Right to Left
Sensor
0 Width
0.00
0.00
0.05
0.10
0.15
0.20
Displacement Distance (inches)
0.25
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 06/14
Page 5 of 7

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet OPB472T11.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
OPB472T11Slotted Optical SwitchOPTEK
OPTEK

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar