DataSheet.es    


PDF XW2D-50Y6 Data sheet ( Hoja de datos )

Número de pieza XW2D-50Y6
Descripción Slim Connector-Terminal Block Conversion Units
Fabricantes Omron 
Logotipo Omron Logotipo



Hay una vista previa y un enlace de descarga de XW2D-50Y6 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! XW2D-50Y6 Hoja de datos, Descripción, Manual

Slim Connector-Terminal Block Conversion Units
XW2D
New Slim Connector-Terminal Block
Conversion Units.
• Mounting area reduced by 35% (in comparison with
40-pole XW2B Units) to contribute to downsizing
control panels and automatic equipment.
• Fallout prevention for terminal screws.
• Round or forked crimp terminals can be used.
• Mount to DIN Track or via screws.
Unique DIN Track lock can maintain open status
during DIN Track attachment and removal.
• Terminal cover can be locked open.
• Screw terminals are arranged by color in groups
of five to simplify counting terminal numbers.
CSM_XW2D_DS_E_1_2
Ordering Information
Connectors
Mounted Con-
nector
No. of
poles
Model
Dimension
A
Dimension
B
Mounted Connector model
Cable Connector model
20 XW2D-20G6
79 57 XG4A-2031
XG4M-2030-T
34 XW2D-34G6
128 100 XG4A-3431
XG4M-3430-T
XG4A
MIL Connectors
40
XW2D-40G6
XW2D-40G6-RF *1
149 110 XG4A-4031
149 110 XG4A-4031
XG4M-4030-T
XG4M-4030-T
XW2D-40G6-RM *2
149 110 XG4A-4031
XG4M-4030-T
50 XW2D-50G6
184 144 XG4A-5031
XG4M-5030-T
20 XW2D-20C6
79 57 XG4C-2031
XG4M-2030-U
XG4C
MIL Connectors
34
40
XW2D-34C6
XW2D-40C6
128 100 XG4C-3431
149 110 XG4C-4031
XG4M-3430-U
XG4M-4030-U
50 XW2D-50C6
184 144 XG4C-5031
XG4M-5030-U
20 XW2D-20X6
79 57 MR-20RFD2 *3
MR-20M *3
MR Sockets
34
XW2D-34X6
128 100 MR-34RFD2 *3
MR-34M *3
50 XW2D-50X6
184 144 MR-50RFD2 *3
MR-50M *3
20 XW2D-20Y6
79 57 MR-20RMD2 *3
MR-20F*3
MR Plugs
34 XW2D-34Y6
128 100 MR-34RMD2 *3
MR-34F*3
50 XW2D-50Y6
184 144 MR-50RMD2 *3
MR-50F *3
*1. This model has built-in bleeder resistance and is used for inputs to Units with Fujitsu connectors, i.e., the CJ1W-ID231/-ID261/-MD261.
*2. This model has built-in bleeder resistance and is used for inputs on Units with MIL connectors, i.e., the CJ1W-ID232/-ID262/-MD263/-MD563.
*3. The MR Connector is made by Honda Tsushin Kogyo.
Accessories (Order Separately)
Connecting Cables for Connector-Terminal Block Conversion Units
Refer to the XW2Z Datasheet.
Ratings and Specifications
Rated current
1A
Rated voltage
125 VAC, 24 VDC
Insulation resistance 100 MΩ min. (at 500 VDC)
Dielectric strength
500 VAC for 1 min (leakage current: 1 mA max.)
Ambient operating tem-
perature
0 to 55°C
1

1 page




XW2D-50Y6 pdf
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
2008.11
In the interest of product improvement, specifications are subject to change without notice.
(c)Copyright OMRON Corporation 2008 All Right Reserved.

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet XW2D-50Y6.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
XW2D-50Y6Slim Connector-Terminal Block Conversion UnitsOmron
Omron

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar