DataSheet.es    


PDF TCS3472 Data sheet ( Hoja de datos )

Número de pieza TCS3472
Descripción Color Light-to-digital Converter
Fabricantes ams 
Logotipo ams Logotipo



Hay una vista previa y un enlace de descarga de TCS3472 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! TCS3472 Hoja de datos, Descripción, Manual

TCS3472
Datasheet - Apr. 2013 - V1.0
General Description
Figure TCS3472 – 1:
Key Benefits and Features
Color Light-to-digital Converter with IR Filter
The TCS3472 device provides a digital return of red, green, blue
(RGB), and clear light sensing values. An IR blocking filter,
integrated on-chip and localized to the color sensing
photodiodes, minimizes the IR spectral component of the
incoming light and allows color measurements to be made
accurately. The high sensitivity, wide dynamic range, and IR
blocking filter make the TCS3472 an ideal color sensor solution
for use under varying lighting conditions and through
attenuating materials.
The TCS3472 color sensor has a wide range of applications
including RGB LED backlight control, solid-state lighting,
health/fitness products, industrial process controls and medical
diagnostic equipment. In addition, the IR blocking filter enables
the TCS3472 to perform ambient light sensing (ALS). Ambient
light sensing is widely used in display-based products such as
cell phones, notebooks, and TVs to sense the lighting
environment and enable automatic display brightness for
optimal viewing and power savings. The TCS3472, itself, can
enter a lower-power wait state between light sensing
measurements to further reduce the average power
consumption.
Benefits
Features
Enables accurate color and light sensing
measurements under varying lighting
conditions by minimizing IR and UV spectral
component effects.
Red, Green, Blue (RGB), and Clear Light
Sensing with IR Blocking Filter
• Programmable Analog Gain and Integration Time
• 3,800,000:1 Dynamic Range
• Very High Sensitivity — Ideally Suited for Operation
Behind Dark Glass
Programmable interrupt pin enables level-style
interrupts when pre-set values are exceeded,
thus reducing companion micro-processor
overhead.
Maskable Interrupt
• Programmable Upper and Lower Thresholds with
Persistence Filter
Enabling a low-power wait-state between RGBC
measurements to reduce average power
consumption.
Power Management
• Low Power — 2.5-μA Sleep State
• 65-μA Wait State with Programmable Wait State Time
from 2.4 ms to > 7 Seconds
Datasheet - Apr. 2013 - V1.0
TCS3472 – 1

1 page




TCS3472 pdf
Ordering Information
Figure TCS3472 – 5:
Ordering Information
Device Address Package-Leads Interface Description
TCS34721
TCS34723
TCS34725
TCS34727
0x39
0x39
0x29
0x29
FN−6
FN−6
FN−6
FN−6
I²C VBUS = VDD Interface
I²C VBUS = 1.8 V Interface
I²C VBUS = VDD Interface
I²C VBUS = 1.8 V Interface
†Contact ams for availability.
Notes:
1. All products are RoHS compliant and ams green.
2. Buy our products or get free samples online at www.ams.com/ICdirect
3. Technical Support is available at www.ams.com/Technical-Support
4. For further information and requests, email us at [email protected]
5. (or) find your local distributor at www.ams.com/distributor
Ordering Number
TCS34721FN
TCS34723FN
TCS34725FN
TCS34727FN
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These are
stress ratings only. Functional operation of the device at these
or any other conditions beyond those indicated under
“Recommended Operating Conditions” is not implied. Exposure
to absolute maximum rated conditions for extended periods
may affect device reliability.
Figure TCS3472 – 6:
Absolute Maximum Ratings over Operating Free-air Temperature Range (unless otherwise noted)
Parameter
Supply voltage, VDD
Input terminal voltage
Output terminal voltage
Output terminal current
Storage temperature range, Tstg
ESD tolerance, human body model
Min Max Units
Comments
3.8 V All voltages are with respect to GND
−0.5 3.8
−0.5 3.8
V
V
−1 20 mA
−40 85
ºC
2000
V
Datasheet - Apr. 2013 - V1.0
TCS3472 – 5

5 Page





TCS3472 arduino
Figure TCS3472 – 16:
Normalized IDD vs. VDD and Temperature
VDD – V
Figure TCS3472 – 17:
Responsivity Temperature Coefficient
Datasheet - Apr. 2013 - V1.0
λ - Wavelength - nm
TCS3472 – 11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet TCS3472.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TCS3471COLOR LIGHT-TO-DIGITAL CONVERTERTAOS
TAOS
TCS3472COLOR LIGHT-TO-DIGITAL CONVERTERTAOS
TAOS
TCS3472Color Light-to-digital Converterams
ams

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar