DataSheet.es    


PDF PC3ST21NIZB Data sheet ( Hoja de datos )

Número de pieza PC3ST21NIZB
Descripción DIP 4pin Phototriac Coupler
Fabricantes Sharp 
Logotipo Sharp Logotipo



Hay una vista previa y un enlace de descarga de PC3ST21NIZB (archivo pdf) en la parte inferior de esta página.


Total 15 Páginas

No Preview Available ! PC3ST21NIZB Hoja de datos, Descripción, Manual

PC3ST21NSZ
Series
Non-zero cross type is also available.
(PC3ST11NSZ Series)
PC3ST21NSZ Series
VDRM : 600V, Zero cross type
DIP 4pin
Phototriac Coupler for triggering
Description
PC3ST21NSZ Series Phototriac Coupler include an
infrared emitting diode (IRED) optically coupled to an
output Phototriac.
These devices feature full wave control and are
ideal isolated drivers for medium to high current Triacs.
DIP package provides 5.0kV isolation from input to
output with superior commutative noise immunity.
Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. 3ST21)
2. Approved by CSA, file No. CA95323 (as model No.
3ST21)
3. Package resin : UL flammability grade (94V-0)
DIN EN60747-5-2 (successor standard of DIN VDE0884)
approved type is also available. (PC3SH21YFZ Series)
Features
1. High repetitive peak off-state voltage (VDRM : 600V)
2. Zero crossing functionality (VOX : MAX. 20V)
3. IFT ranks available (see Model Line-up section in this
datasheet)
4. 4 pin DIP package
5. Superior noise immunity (dV/dt : MIN. 1 000V/µs)
6. Lead-free components are also available (see Model
Line-up section in this datasheet)
7. Double transfer mold construction (Ideal for Flow
Soldering)
8. High isolation voltage between input and output
(Viso(rms) : 5.0kV)
Applications
1. Triggering for Triacs used to switch on and off
devices which require AC Loads.
For example heaters, fans, motors, solenoids, and
valves.
2. AC line control in power supply applications.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A07101EN
1 Date Mar. 31. 2004
© SHARP Corporation

1 page




PC3ST21NIZB pdf
PC3ST21NSZ Series
Model Line-up (1) (Lead-free components)
Lead Form
Through-Hole
Shipping Package
DIN
EN60747-5-2
-
Model No. PC3ST21NSZBF
PC3ST21NSZCF
Approved
-
-
SMT Gullwing
Sleeve
100pcs/sleeve
-
Approved
PC3ST21NIZBF
PC3ST21NIZCF
-
-
Wide Through-Hole
-
Approved
PC3ST21NFZBF
PC3ST21NFZCF
-
-
Rank mark
IFT[mA]
(VD=4V,
RL=100)
B MAX.7
C MAX.5
Lead Form
Wide SMT Gullwing
Shipping Package
Sleeve
100pcs/sleeve
DIN
EN60747-5-2
-
Model No. PC3ST21NUZBF
PC3ST21NUZCF
Approved
-
-
SMT Gullwing
Wide SMT Gullwing
Taping
2 000pcs/reel
-
Approved
-
Approved
PC3ST21NIPBF
PC3ST21NIPCF
-
-
PC3ST21NUPBF
PC3ST21NUPCF
-
-
Rank mark
IFT[mA]
(VD=4V,
RL=100)
B MAX.7
C MAX.5
Model Line-up (2) (Lead solder plating components)
Lead Form
Shipping Package
Through-Hole
SMT Gullwing
Sleeve
100pcs/sleeve
Wide Through-Hole
DIN
EN60747-5-2
Model No.
-
PC3ST21NSZB
PC3ST21NSZC
Approved
-
-
-
PC3ST21NIZB
PC3ST21NIZC
Approved
-
-
-
PC3ST21NFZB
PC3ST21NFZC
Approved
-
-
Rank mark
IFT[mA]
(VD=4V,
RL=100)
B MAX.7
C MAX.5
Lead Form
Wide SMT Gullwing
Shipping Package
Sleeve
100pcs/sleeve
DIN
EN60747-5-2
Model No.
-
PC3ST21NUZB
PC3ST21NUZC
Approved
-
-
SMT Gullwing
Wide SMT Gullwing
Taping
2 000pcs/reel
-
PC3ST21NIPB
PC3ST21NIPC
Approved
-
-
-
PC3ST21NUPB
PC3ST21NUPC
Approved
-
-
Rank mark
IFT[mA]
(VD=4V,
RL=100)
B MAX.7
C MAX.5
Please contact a local SHARP sales representative to inquire about production status.
Sheet No.: D2-A07101EN
5

5 Page





PC3ST21NIZB arduino
PC3ST21NSZ Series
Cleaning instructions
Solvent cleaning :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
Ultrasonic cleaning :
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Recommended solvent materials :
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.
In case the other type of solvent materials are intended to be used, please make sure they work fine in
actual using conditions since some materials may erode the packaging resin.
Presence of ODC
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
Sheet No.: D2-A07101EN
11

11 Page







PáginasTotal 15 Páginas
PDF Descargar[ Datasheet PC3ST21NIZB.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
PC3ST21NIZBDIP 4pin Phototriac CouplerSharp
Sharp
PC3ST21NIZBFDIP 4pin Phototriac CouplerSharp
Sharp
PC3ST21NIZCDIP 4pin Phototriac CouplerSharp
Sharp
PC3ST21NIZCFDIP 4pin Phototriac CouplerSharp
Sharp

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar