|
|
PDF Kinect_sensor Data sheet ( Hoja de datos )
| Número de pieza | Kinect_sensor | |
| Descripción | XBOX 360 Kinect sensor | |
| Fabricantes | Microsoft Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de Kinect_sensor (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
|
No Preview Available !
www.DataSheet4U.net
1 English
19 Français
37 Español
59 Português
1 page  
CHOOSE A LOCATION FOR YOUR SENSOR
2 ft– 6 ft
(0.6m–1.8m)
Sold separately*
* Sensor mounting adapter
required for above TV
mounting (sold separately)
For the best play space and sensor
performance, place your sensor between 2
feet and 6 feet (0.6 and 2 meters) high, the
closer to the low or high limit, the better.
Also:
• Place the sensor on a stable surface.
• Make sure the sensor is aligned with the
center of your TV, and as close as possible
to the front edge of the table or shelf.
• Make sure to place the sensor in a
location where it will not fall or be struck
during gameplay.
• Do not put the sensor on your console.
• Do not place the sensor on or in front of a
speaker or a surface that vibrates or
makes noise.
• Keep the sensor out of direct sunlight.
• Do not use near any heat sources. Use the
sensor within its specified operating
temperature range of 41 °F – 95 °F (5 °C –
35 °C). If the sensor is exposed to an
environment outside its prescribed range,
turn it off and allow the temperature to
stabilize within the specified range before
using the sensor again.
Important
Only adjust the sensor location by moving
the base. Do not adjust the sensor viewing
angle by hand, by tilting the sensor on its
base. After setup is complete, let the sensor
motors adjust the viewing angle, or you risk
damaging your sensor.
4
WARNING
Arrange all cables and cords so that
people and pets are not likely to trip
over or accidentally pull on them as
they move around or walk through the
area. When the sensor and console are
not in use, you may need to disconnect
all cables and cords from the sensor
and console to keep them out of the
reach of children and pets. Do not allow
children to play with cables and cords.
WARNING
Avoid Glare
To minimize eyestrain from glare, try
the following:
• Position yourself at a comfortable
distance from your television or
monitor and the Kinect sensor.
• Place your television or monitor and
Kinect sensor away from light sources
that produce glare, or use window
blinds to control light levels.
• Choose soothing natural light that
minimizes glare and eyestrain and
increases contrast and clarity.
• Adjust your television or monitor
brightness and contrast.
5 Page 
Troubleshooting
If you encounter problems, try the possible
solutions provided below.
Sensor Doesn’t Work
• Make sure cables are connected. When
used with an original Xbox 360 console,
make sure the sensor is connected to the
back USB port, and the USB/power cable
is plugged in. The light on the front of the
sensor will light up when the sensor is on.
• Make sure the sensor is in a well-
ventilated area.
• If the sensor software hasn’t been set up,
insert the sensor software disc for a
system update.
Sensor Doesn’t See Player
• Play in the sensor’s play space.
• Turn on lights to brighten the play space.
• Prevent lights, including sunlight, from
shining directly on the sensor.
• Try wearing different clothing that
contrasts with the background of your
play space.
• Clean the sensor lens with a dry cloth.
• Make sure nothing is blocking the sensor’s
viewing angle.
Sensor Loses Player
Try leaving and reentering the play space if
the sensor has stopped tracking you.
Sensor Doesn’t Hear Player
• Don’t place the sensor near sources of
vibration, TV speakers, or other audio
sources.
• Make sure nothing is blocking the sensor’s
microphone array.
Sensor Motors Don’t Adjust Sensor
Viewing Angle
• Make sure cables are connected and the
sensor light is on. When used with an
original Xbox 360 console, the sensor
must be connected to the back USB port,
not a front USB port, and the USB/power
cable must be connected to a power
outlet.
• Make sure the sensor’s motion isn’t
blocked by anything.
• Don’t tilt your sensor on its base or adjust
the sensor viewing angle by hand. Let the
sensor motors adjust the viewing angle
automatically, or you risk damaging your
sensor.
10
11 Page | ||
| Páginas | Total 19 Páginas | |
| PDF Descargar | [ Datasheet Kinect_sensor.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| Kinect_sensor | XBOX 360 Kinect sensor | Microsoft Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |