DataSheet.es    


PDF T491S155K020AS-F Data sheet ( Hoja de datos )

Número de pieza T491S155K020AS-F
Descripción Solid Tantalum Chip Capacitors
Fabricantes CDE 
Logotipo CDE Logotipo



Hay una vista previa y un enlace de descarga de T491S155K020AS-F (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! T491S155K020AS-F Hoja de datos, Descripción, Manual

Type T491 Solid Tantalum Chip Capacitors
Solid Tantalum Chip Capacitors for Surface Mount Applications
Highlights
Low DF and DC Leakage
Temperature Stable
260 ºC for 10 Seconds Soldering
Meets IECQ Standard
QC300801/US0001
Meets EIA Standard 535BAAC
The T491 Series’ physical outline and dimen-
sions conform to the global standard for tanta-
lum capacitor chips, and the T491 exceeds the
requirements of EIA standard 535BAAC. T491
chips are specifically for automated surface
mount processes and equipment. The termina-
tions are 100% Matte-Tin. Reliability and
thermal stability are assured by lead-frame at-
tachments to the tantalum pellet made by micro-
processor-controlled welding and a high tem-
perature silver epoxy adhesive. Standard pack-
aging is compatible with all tape-fed placement
units and with EIA RS- 481-1 tape and reel speci-
fication.
Specifications
Capacitance Range: 0.10 µF to 330 µF
Voltage Range: 4 Vdc to 50 VDC
Tolerance: ±10% standard, ±20% available
Operating Temperature: –55 ºC to +125 ºC (with proper derating)
Cap Change From Initial Limit: –10% @ –55 ºC; +10% @ +85 ºC;
+12% @ +125 ºC
DC Leakage: At 25 ºC — See Ratings
At 85 ºC — 10 x 25 ºC limit
At 125 ºC — 12 x 25 ºC limit
Dissipation Factor: 0.1 µF to 1.0 µF — 4%
1.5 µF to 68 µF — 6%
100 µF to 330 µF — 8%
Standard Packaging Tape and Reel: EIA RS-481-1
Complies with the EU Directive
2002/95/EC requirement
restricting the use of Lead (Pb),
Mercury (Hg), Cadmium (Cd),
Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB)
and PolyBrominated Diphenyl
Ethers (PBDE).
Case
Code
S
T
A
B
C
D
X
EIA
IECQ
3216L
3528L
3216
3528
6032
7343
7343H
Qty per
7" Reel
2,500
2,500
2,000
2,000
500
500
500
13” Reels Available on Special Order
Width
8mm
8mm
8mm
8mm
12mm
12mm
12mm
Tape
Pitch
4mm
4mm
4mm
4mm
8mm
8mm
8mm
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com

1 page




T491S155K020AS-F pdf
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.
4

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet T491S155K020AS-F.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
T491S155K020AS-FSolid Tantalum Chip CapacitorsCDE
CDE

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar