DataSheet.es    


PDF CDX-M60UI Data sheet ( Hoja de datos )

Número de pieza CDX-M60UI
Descripción FM/AM COMPACT DISC PLAYER SERVICE MANUAL
Fabricantes Sony 
Logotipo Sony Logotipo



Hay una vista previa y un enlace de descarga de CDX-M60UI (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! CDX-M60UI Hoja de datos, Descripción, Manual

CDX-M60UI/MR60UI
SERVICE MANUAL
Ver. 1.1 2009.02
US Model
Canadian Model
CDX-M60UI
AEP Model
UK Model
CDX-MR60UI
E Model
CDX-M60UI
Photo: CDX-MR60UI
• The tuner and CD sections have no adjustments.
AUDIO POWER SPECIFICATIONS
(CDX-M60UI)
CEA2006 Standard
Power Output: 17 Watts RMS × 4 at
4 Ohms <1 % THD + N
SN Ratio: 82 dBA
(reference: 1 Watt into 4 Ohms)
Model Name Using Similar Mechanism
CD Drive Mechanism Type
Optical Pick-up Name
CDX-GT630UI
MG-101Z-188//Q
DAX-25A
SPECIFICATIONS
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and utter: Below measurable limit
Tuner section
FM
Tuning range:
CDX-M60UI:
87.5 – 108.0 MHz (at 50 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)
CDX-MR60UI: 87.5 – 108.0 MHz
FM tuning interval:
CDX-M60UI: 50 kHz/200 kHz switchable
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 150 kHz
Usable sensitivity: 10 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Separation: 40 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM (CDX-M60UI)
Tuning range:
531 – 1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step)
AM tuning interval:
9 kHz/10 kHz switchable
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Sensitivity: 26 μV
USB Player section
Interface: USB (Full-speed)
Maximum current: 500mA
Power amplier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W × 4 (at 4 ohms)
– Continued on next page –
MW/LW (CDX-MR60UI)
Tuning range:
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Sensitivity:
MW: 26 μV, LW: 45 μV
CDX-M60UI
FM/AM COMPACT DISC PLAYER
CDX-MR60UI
FM/MW/LW COMPACT DISC PLAYER
9-889-364-02
2009B04-1
© 2009.02
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation

1 page




CDX-M60UI pdf
• LOCATION OF CONTROLS
• CDX-M60UI
SECTION 2
GENERAL
CDX-M60UI/MR60UI
This section is extracted
from instruction manual.
Location of controls and basic operations
Main unit
   


OFF SEEK
ZAP
SOURCE

OPEN
MODE
SEEK
PUSH ENTER / SELECT
CAT
BTM
ALBUM
12
REP SHUF DM
PAUSE SCRL
AUX
3 4 5 6 DSPL
  RB
Front panel removed
RK
RT
RL RM
RESET
Card remote commander
RM-X151


X
XB
OFF
ATT
SOURCE
SEL
MODE
+
DSPL
SCRL
123
456
XE
XG

XH
XI
XK
XT
+
VOL
RE RG
RH RI
This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
" OFF button
To power off; stop the source.
# (BACK) button page 10
To return to the previous display.
$ SOURCE button
To power on; change the source (Radio/CD/
USB/AUX)*1.
% ZAP button page 11
To enter ZAPPIN™ mode.
& Control dial/select button
To adjust volume (rotate); select setup items
(press and rotate).
' Receptor for the card remote
commander
( Display window
) OPEN button page 7
* SEEK +/– buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
8
+ MODE button page 11, 14, 15
Press to: Select the radio band (FM/AM)*1/
select the play mode of iPod.
Press and hold to: Enter/cancel the passenger
control.
, (BROWSE) button page 10
To enter the Quick-BrowZer mode.
- BTM/CAT*2 button page 11
To start the BTM function (press and hold).
. Frequency select switch (located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
/ Number buttons
CD/USB:
 /  : ALBUM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
 : REP page 12, 13, 15
 : SHUF page 12, 13, 15
 : DM+
Improves digitally compressed sound,
such as MP3.
To activate the DM+ function, set
“ON.” To cancel, set “OFF.”
 : PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
0 DSPL (display)/SCRL (scroll) button
page 12, 13, 15
To change display items (press); scroll the
display item (press and hold).
1 AUX input jack page 18
To connect a portable audio device.
2 RESET button page 6
3 ;(eject) button
To eject the disc.
4 Disc slot
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 6).
X  ()/ () buttons
To control CD/radio/USB, the same as
4&&, –/+ on the unit.
Setup, sound setting, etc., can be operated by
 .
XB DSPL (display) button page 12, 13, 15
To change display items.
XT VOL (volume) +/– button
To adjust volume.
XE ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
XG SEL (select) button
The same as the select button on the unit.
XH . (+)/N (–) buttons
To control CD/USB, the same as  / 
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
. N.
XI SCRL (scroll) button
To scroll the display item.
XK Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 In the case of a CD changer, HD Radio tuner or
SAT tuner being connected; when 4063$& is
pressed, the connected device (“HD,” “XM” or “SR”)
will appear in the display, depending on which
device is connected. Furthermore, if .0%& is
pressed, you can switch the changer, HD Radio
tuner band or SAT tuner band.
*2 When the SAT tuner is connected.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless 4063$& on the unit is pressed, or a disc is
inserted to activate the unit first.
9
• CDX-MR60UI
Location of controls and basic operations
Main unit
   


OFF SEEK
ZAP
SOURCE

OPEN
MODE
SEEK
PUSH ENTER / SELECT
PTY
AF / TA
ALBUM
12
REP SHUF DM
PAUSE SCRL
AUX
3 4 5 6 DSPL
  RB
Front panel removed
RI
RT
RK RL
RESET
Card remote commander
RM-X151


RM
X
OFF
ATT
SOURCE
SEL
MODE
+
DSPL
SCRL
123
456
XT
XE

XG
XH
XI
XB
+
VOL
RE RG RH
This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
" OFF button
To power off; stop the source.
# (BACK) button page 10
To return to the previous display.
$ SOURCE button
To power on; change the source (Radio/CD/
USB/AUX)*.
% ZAP button page 11
To enter ZAPPIN™ mode.
& Control dial/select button
To adjust volume (rotate); select setup items
(press and rotate).
' Receptor for the card remote
commander
( Display window
) OPEN button page 7
* SEEK +/– buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
8
+ MODE button page 11, 16, 17
Press to: Select the radio band (FM/MW/
LW)*/select the play mode of iPod.
Press and hold to: Enter/cancel the passenger
control.
, (BROWSE) button page 10
To enter the Quick-BrowZer mode.
- AF (Alternative Frequencies)/
TA (Traffic Announcement)/
PTY (Program Type) button page 12,
13
To set AF and TA (press); select PTY (press
and hold) in RDS.
. Number buttons
CD/USB:
 /  : ALBUM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
 : REP page 13, 15, 16
 : SHUF page 13, 15, 16
 : DM+
Improves digitally compressed sound,
such as MP3.
To activate the DM+ function, set
“ON.” To cancel, set “OFF.”
 : PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
/ DSPL (display)/SCRL (scroll) button
page 12, 13, 14, 16, 17
To change display items (press); scroll the
display item (press and hold).
0 AUX input jack page 19
To connect a portable audio device.
1 RESET button page 6
2 ;(eject) button
To eject the disc.
3 Disc slot
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 6).
RM  ()/ () buttons
To control CD/radio/USB, the same as
4&&, –/+ on the unit.
Setup, sound setting, etc., can be operated by
 .
X DSPL (display) button page 12, 13,
14, 16, 17
To change display items.
XB VOL (volume) +/– button
To adjust volume.
XT ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
XE SEL (select) button
The same as the select button on the unit.
XG . (+)/N (–) buttons
To control CD/USB, the same as  / 
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
. N.
XH SCRL (scroll) button
To scroll the display item.
XI Number buttons
To receive stored stations (press); store
stations (press and hold).
* In the case of a CD changer being connected; when
4063$& is pressed, “CD” and the unit number will
appear in the display. Furthermore, if .0%& is
pressed, you can switch the changer.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless 4063$& on the unit is pressed, or a disc is
inserted to activate the unit first.
9
5

5 Page





CDX-M60UI arduino
3-5. CHASSIS (T) SUB ASSY
two screws
(M 1.7 × 2.5)
CDX-M60UI/MR60UI
two screws
(M 1.7 × 2.5)
chassis (T) sub assy
3-6. ROLLER ARM ASSY
spring (RAL)
claw
roller arm assy
gear (RA1)
washer
spring (RAR)
11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet CDX-M60UI.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CDX-M60UIFM/AM COMPACT DISC PLAYER SERVICE MANUALSony
Sony

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar