DataSheet.es    

PDF C5934 Datasheet ( Hoja de datos )

Número de pieza C5934
Descripción PNP / NPN Epitaxial Planar Silicon Transistors
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo

Total 5 Páginas
		
C5934 Hoja de datos, Descripción, Manual
Ordering number : ENN7906
2SA2117 / 2SC5934
PNP / NPN Epitaxial Planar Silicon Transistors
2SA2117 / 2SC5934
High Current Switching Applications
Applications
Relay drivers, lamp drivers, motor drivers.
Features
Adoption of MBIT process.
High-speed switching.
Large current capacitance.
Low collector-to-emitter saturation voltage.
Package Dimensions
unit : mm
2041A
[2SA2117 / 2SC5934]
4.5
10.0 2.8
3.2
Specifications
( ) : 2SA2117
Absolute Maximum Ratings at Ta=25°C
1.6
1.2
0.75
123
2.55 2.55
2.55 2.55
2.4
0.7
1 : Base
2 : Collector
3 : Emitter
SANYO : TO-220ML
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Base Current
Symbol
VCBO
VCEO
VEBO
IC
ICP
IB
Collector Dissipation
PC
Junction Temperature
Storage Temperature
Tj
Tstg
Electrical Characteristics at Ta=25°C
Tc=25°C
Conditions
Ratings
(--50)60
(--)50
(--)6
(--)5
(--)8
(--)1
2
18
150
--55 to +150
Unit
V
V
V
A
A
A
W
W
°C
°C
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Symbol
ICBO
IEBO
hFE
fT
Conditions
VCB=(--)40V, IE=0
VEB=(--)4V, IC=0
VCE=(--)2V, IC=(--)1A
VCE=(--)5V, IC=(--)1A
min
200
Ratings
typ
max
Unit
(--)10
µA
(--)10
µA
(560)700
(130)200
MHz
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
81004 TS IM TB-00000011 No.7906-1/5

1 page

C5934 pdf
2SA2117 / 2SC5934
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of August, 2004. Specifications and information herein are subject
to change without notice.
PS No.7906-5/5

5 Page



PáginasTotal 5 Páginas
PDF Descargar[ C5934.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
C5931 2SC5931Panasonic Semiconductor
Panasonic Semiconductor
C5934PNP / NPN Epitaxial Planar Silicon TransistorsSanyo Semicon Device
Sanyo Semicon Device
C59362SC5936ETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2019   |  Privacy Policy  |  Contacto  |  Buscar