|
|
PDF GP800DDM12 Data sheet ( Hoja de datos )
| Número de pieza | GP800DDM12 | |
| Descripción | Hi-Reliability Dual Switch IGBT Module Advance Information | |
| Fabricantes | Dynex Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GP800DDM12 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
GP800DDM12
Replaces May 2000 version, DS5291-1.3
FEATURES
s High Thermal Cycling Capability
s 800A Per Switch
s Non Punch Through Silicon
s Isolated MMC Base with AlN Substrates
GP800DDM12
Hi-Reliability Dual Switch IGBT Module
Advance Information
DS5291-2.0 October 2000
KEY PARAMETERS
VCES
VCE(sat)
IC
IC(PK)
(typ)
(max)
(max)
1200V
2.7V
800A
1600A
APPLICATIONS
s High Reliability Inverters
s Motor Controllers
s Traction Drives
s Resonant Converters
The Powerline range of high power modules includes dual
and single switch configurations covering voltages from 1200V to
3300V and currents up to 4800A.
The GP800DDM12 is a dual switch 1200V, n channel
enhancement mode, insulated gate bipolar transistor (IGBT)
module. The IGBT has a wide reverse bias safe operating area
(RBSOA) ensuring reliability in demanding applications. This
device is optimised for traction drives and other applications
requiring high thermal cycling capability or very high reliability.
The module incorporates an electrically isolated base plate
and low inductance construction enabling circuit designers to
optimise circuit layouts and utilise earthed heat sinks for safety.
ORDERING INFORMATION
Order As:
GP800DDM12
Note: When ordering, please use the whole part number.
12(C2)
2(C2)
7(C1)
4(E2)
1(E1)
11(G2)
10(E2)
3(C1)
5(E1)
6(G1)
Fig. 1 Dual switch circuit diagram
5
6
7
8
3
9
12
11
10
4
1
2
Outline type code: D
(See package details for further information)
Fig. 2 Electrical connections - (not to scale)
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.
www.dynexsemi.com
1/11
1 page  
GP800DDM12
TYPICAL CHARACTERISTICS
1600
1400
Common emitter
Tcase = 25˚C
Vge = 20/15/12/10V
1200
1000
800
600
400
200
0
0 1.0 2.0 3.0 4.0 5.0
Collector-emitter voltage, Vce - (V)
Fig. 3 Typical output characteristics
1600
1400
Common emitter
Tcase = 125˚C
Vge = 20/15/12/10V
1200
1000
800
600
400
200
0
0 1.0 2.0 3.0 4.0 5.0
Collector-emitter voltage, Vce - (V)
Fig. 4 Typical output characteristics
160
Conditions:
Tcase = 25˚C,
140 VCE = 600V,
VGE = ±15V
120
100
A
B
80 C
60
40
20
A : Rg = 6.8Ω
B : Rg = 4.7Ω
C : Rg = 3.3Ω
0
0 100 200 300 400 500 600 700 800
Collector current, IC - (A)
Fig. 5 Typical turn-on energy vs collector current
220
Conditions:
200 Tcase = 125˚C,
VCE = 600V,
180 VGE = ±15V
A
160 B
140
C
120
100
80
60
40
A : Rg = 6.8Ω
20 B : Rg = 4.7Ω
C : Rg = 3.3Ω
0
0 100 200 300 400 500 600 700 800
Collector current, IC - (A)
Fig. 6 Typical turn-off energy vs collector current
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.
www.dynexsemi.com
5/11
5 Page 
GP800DDM12
http://www.dynexsemi.com
e-mail: [email protected]
HEADQUARTERS OPERATIONS
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln.
Lincolnshire. LN6 3LF. United Kingdom.
Tel: 00-44-(0)1522-500500
Fax: 00-44-(0)1522-500550
DYNEX POWER INC.
Unit 7 - 58 Antares Drive,
Nepean, Ontario, Canada K2E 7W6.
Tel: 613.723.7035
Fax: 613.723.1518
Toll Free: 1.888.33.DYNEX (39639)
CUSTOMER SERVICE CENTRES
Central Europe Tel: +33 (0)1 58 04 91 02. Fax: +33 (0)1 46 38 51 33
North America Tel: 011-800-5554-5554. Fax: 011-800-5444-5444
UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
SALES OFFICES
Central Europe Tel: +33 (0)1 69 18 90 00. Fax: +33 (0)1 46 38 51 33
North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) /
Tel: (949) 733-3005. Fax: (949) 733-2986.
UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
These offices are supported by Representatives and Distributors in many countries world-wide.
© Dynex Semiconductor 2000 Publication No. DS5291-2 Issue No. 2.0 October 2000
TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRODUCED IN UNITED KINGDOM
Datasheet Annotations:
Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:-
Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started.
Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change.
Advance Information: The product design is complete and final characterisation for volume production is well in hand.
No Annotation: The product parameters are fixed and the product is available to datasheet specification.
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as
a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves
the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such
methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication
or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury
or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.
All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.
www.dynexsemi.com
11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet GP800DDM12.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GP800DDM12 | Hi-Reliability Dual Switch IGBT Module Advance Information | Dynex Semiconductor |
| GP800DDM18 | Hi-Reliability Dual Switch IGBT Module Advance Information | Dynex Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |