|
|
PDF GP400LSS18 Data sheet ( Hoja de datos )
| Número de pieza | GP400LSS18 | |
| Descripción | Single Switch IGBT Module | |
| Fabricantes | Dynex Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GP400LSS18 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
GP400LSS18
FEATURES
s Non Punch Through Silicon
s Isolated Copper Baseplate
s Low Inductance Internal Construction
s 400A Per Module
GP400LSS18
Single Switch IGBT Module
DS5305-2.0 November 2000
KEY PARAMETERS
VCES
VCE(sat)
IC
IC(PK)
(typ)
(max)
(max)
1800V
3.5V
400A
800A
APPLICATIONS
s High Power Inverters
s Motor Controllers
s Induction Heating
s Resonant Converters
The Powerline range of high power modules includes half
bridge, dual and single switch configurations covering voltages
from 600V to 3300V and currents up to 4800A.
The GP400LSS18 is a single switch 1800V, n channel
enhancement mode, insulated gate bipolar transistor (IGBT)
module. The IGBT has a wide reverse bias safe operating area
(RBSOA) ensuring reliability in demanding applications.
The module incorporates an electrically isolated base plate
and low inductance construction enabling circuit designers to
optimise circuit layouts and utilise earthed heat sinks for safety.
ORDERING INFORMATION
Order As:
GP400LSS18
Note: When ordering, please use the whole part number.
2(E)
5(E1)
3(G1)
1(C)
4(C1)
Fig. 1 Single switch circuit diagram
4
52
3
1
Outline type code: L
(See package details for further information)
Fig. 2 Electrical connections - (not to scale)
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.
www.dynexsemi.com
1/11
1 page  
GP400LSS18
TYPICAL CHARACTERISTICS
800
Common emitter
Tcase = 25˚C
700
Vge = 20/15/12V
600 Vge = 10V
500
400
300
200
100
0
0 1.0 2.0 3.0 4.0 5.0 6.0
Collector-emitter voltage, Vce - (V)
Fig.3 Typical output characteristics
7.0
800
Common emitter
Tcase = 125˚C
700
Vge = 20/15/12V
600 Vge = 10V
500
400
300
200
100
0
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Collector-emitter voltage, Vce - (V)
Fig.4 Typical output characteristics
350
Tcase = 25˚C
VGE = ±15V
300 VCE = 900V
250
200 A
150
100
50
0
0
B
C
A: Rg = 13Ω
B: Rg = 6.8Ω
C: Rg = 4.7Ω
50 100 150 200 250 300 350 400
Collector current, IC - (A)
Fig.5 Typical turn-on energy vs collector current
350
Tcase = 125˚C
VGE = ±15V
300 VCE = 900V
A
250
200 B
150 C
100
50 A: Rg = 13Ω
B: Rg = 6.8Ω
C: Rg = 4.7Ω
0
0 50 100 150 200 250 300 350 400
Collector current, IC - (A)
Fig.6 Typical turn-on energy vs collector current
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.
www.dynexsemi.com
5/11
5 Page 
GP400LSS18
http://www.dynexsemi.com
e-mail: [email protected]
HEADQUARTERS OPERATIONS
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln.
Lincolnshire. LN6 3LF. United Kingdom.
Tel: 00-44-(0)1522-500500
Fax: 00-44-(0)1522-500550
DYNEX POWER INC.
Unit 7 - 58 Antares Drive,
Nepean, Ontario, Canada K2E 7W6.
Tel: 613.723.7035
Fax: 613.723.1518
Toll Free: 1.888.33.DYNEX (39639)
CUSTOMER SERVICE CENTRES
Central Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33
North America Tel: 011-800-5554-5554. Fax: 011-800-5444-5444
UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
SALES OFFICES
Central Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33
North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) /
Tel: (949) 733-3005. Fax: (949) 733-2986.
UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
These offices are supported by Representatives and Distributors in many countries world-wide.
© Dynex Semiconductor 2000 Publication No. DS5305-2 Issue No. 2.0 November 2000
TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM
Datasheet Annotations:
Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:-
Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started.
Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change.
Advance Information: The product design is complete and final characterisation for volume production is well in hand.
No Annotation: The product parameters are fixed and the product is available to datasheet specification.
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as
a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves
the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such
methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication
or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury
or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.
All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.
www.dynexsemi.com
11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet GP400LSS18.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GP400LSS12 | Single Switch IGBT Module | Dynex Semiconductor |
| GP400LSS18 | Single Switch IGBT Module | Dynex Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |